期刊文献+

基于阿雷尼乌斯模型开展的加速寿命试验激活能研究 被引量:4

Research on the Activation Energy of Accelerated Life Testing Based on Arrhenius Model
下载PDF
导出
摘要 目前"长寿命"已成为航空航天产品的通用要求,而整个系统的长寿命很大程度上取决于电子产品的寿命,Arrhenius模型是使用最为广泛的用于预计电子产品寿命的加速寿命试验方法之一。而在使用Arrhenius模型时,激活能一般都参照美军标中的参考值取0.5~0.7eV,该数值表征产品的失效机理。本文基于国内90年代建成的某模拟集成电路生产线生产的一款运算放大器,通过多组试验数据,拟合计算其激活能Ea,并用相同试验方法拟合出基于同一生产线的AD转换器、驱动器的激活能Ea,通过对比得出激活能Ea与哪些因素相关。 Nowadays the “long lifetime” has been a general demand for aerospace products which was largely determained by the condition of electric products in the whole system. Arrheniusmodel is one of the most popular methods which are used to predict the lifetime of electric products. The Ea-activity energy in Arrhenius model is always assumed as 0.5~0.7 eV according to American MilitaryStandard which means failure mechanism. This article researched Ea in the Arrhenius model based on a type of Operational Amplifiers which were made in the line that set up in 1990s. From several groups of data for AD Conversion and Operational Amplifiers and Driver, Ea was calculated and relevant factors are given.
作者 吴兆希 韩晓东 朱恒静 白璐 WU Zhao-xi;HAN Xiao-dong;ZHU Heng-jing;BAI Lu(The 24th Research Institute of CETC,Chongqing 400060;Material Department of China Academy of Space Technology,Beijing 100086)
出处 《环境技术》 2019年第1期30-33,共4页 Environmental Technology
关键词 模拟集成电路 阿雷尼乌斯模型 激活能 analog integrated circuit Arrhenius model activation energy
  • 相关文献

参考文献2

二级参考文献18

  • 1王自力.可靠性数据分析[M].北京:国防工业出版社,2011:89-95.
  • 2GUNN J,CAMENGA R,MALIK S.Rapid assessment of the humidity dependence of IC failure modes by use of hast[C]// Proc IEEE Int Reliab Phys Symp.Phoenix,AZ,USA.1983:66-72.
  • 3STRINY K,SCHELLING A.Reliability evaluation of aluminum-metallized MOS dynamic RAM's in plastic packages in high humidity and temperature environments[J].IEEE Trans Compon,Hybr and Manufac Technol,1981,4(4):476-481.
  • 4PECK D.A comprehensive model for humidity testing correlation[C]//Proc IEEE Int Reliab Phys Symp.Anaheim,CA,USA.1986:44-50.
  • 5DUNN C,MCPHERSON J.Recent observations on VLSI bond pad corrosion kinetics[J].J Electrochem Soc,1988,135(3):661-665.
  • 6YUE J,FUSTEN W,TAYLOR R.Stress induced voids in aluminum interconnects during IC processing[C]// Proc IEEE Int Reliab Phys Symp.Orlando,FL,USA.1985:126-137.
  • 7MCPHERSON J,DUNN C.A model for stressinduced metal notching and voiding in very large-scaleintegrated A1-Si (1%) metallization[J].J Vac Sci & Technol B,1987,5(5):1321-1325.
  • 8OGAWA E T.Stress-induced voiding under vias connected to wide Cu metal leads[C]//Proc IEEE Int Reliab Phys Symp.Dallas,TX,USA.2002:312-321.
  • 9CHRISTIANSEN C.Effect of wire thickness on electromigration and stress migration lifetime of Cu[C]// IEEE Symp Phys and Fail Anal of Integr Circ.Singapore.2006:349-354.
  • 10COFFIN I F Jr.Low cycle fatigue[J].Materials Engineering Quarterly,1963,3(1):15-24.

共引文献4

同被引文献68

引证文献4

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部