摘要
采用理论分析及有限元仿真的方法,首先对称重传感器清洗机机架进行静力学分析;之后对其进行模态分析,确定了称重传感器清洗机机架的固有频率和振型;最后研究了外部激励对机架气缸安装部位幅值频率曲线的影响,通过幅值频率曲线确定了称重传感器清洗机机架可能发生的共振频率。
This paper adopts theoretical analysis and finite element simulation methods.Firstly,static analysis is performed on the load cell cleaning machine frame,and then the mode has undergone modal analysis.After the analysis,the natural frequency and vibration mode of the load cell cleaning machine frame has been determined.Finally,the influence of external excitation on the amplitude frequency curve of the cylinder mounting position is studied.Possible resonance frequency of the load cell cleaning machine frame is determined by the amplitude frequency curve.
作者
冯博琳
王军利
张文升
李托雷
雷帅
刘崇智
FENG Bo-lin;WANG Jun-li;ZHANG Wen-sheng;LI Tuo-lei;LEI Shuai;LIU Chong-zhi(Intelligent Human-Computer Collaborative Engineering Research Center,Northwest Institute of Mechanical & Electrical Engineering,Xianyang 712099,China;School of Mechanical Engineering,Shaanxi University of Technology,Hanzhong 723000,China;China Aviation Aircraft Limited by Share Ltd,Changsha Landing Gear Branch,Hanzhong 723001,China)
出处
《陕西理工大学学报（自然科学版）》
2019年第1期17-21,共5页
Journal of Shaanxi University of Technology:Natural Science Edition
基金
陕西省重点研发计划项目(2017ZDXM-GY-138)
陕西省自然科学基础研究计划项目(2016JM1030)
陕西省教育厅科学研究项目(15JK1136)
