摘要
为了提高煤泥浮选效果,以蒲县能源有限公司选煤厂的浮选入料为研究对象,采用高剪切调浆技术对其表面进行改质处理,然后进行煤泥浮选试验。试验结果表明:当要求精煤灰分为10%时,与常规浮选的浮选指标相比,在调浆转速为2 000 r/min、调浆时间为2 min的条件下,精煤产率增加约8个百分点,精煤可燃体回收率提高7个百分点,柴油用量节省45个百分点,煤泥浮选效果良好。
For improving fine coal flotation performance,flotation test is made with the flotation feed of Puxian Energy Company′s Coal Preparation Plant after it goes through surface modification treatment using high-shear conditioning technology.Test result shows that flotation process is superior to conventional process in performance.At a desired ash of flotation concentrate of 10%,a pulp conditioning speed of 2000r/min and a conditioning time of 2min,the yield of concentrate and recovery of combustible matters are seen to increase by about 8 percentage points and 7 percentage points,respectively,with a reduction of diesel consumption by 45 percentage points.
作者
张峻彦
ZHANG Junyan(Coal Washing Department,Shanxi Coal Import&Export(Group)Co.Ltd.,Taiyuan 030006,China)
出处
《选煤技术》
CAS
2018年第6期51-54,59,共5页
Coal Preparation Technology
关键词
煤泥浮选
细泥罩盖
高剪切调浆
表面改质
精煤产率
精煤可燃体回收率
fine coal flotation
overspread of kaolinite on top of pulp
high-shear pulp conditioning
surface modification
concentrate yield
recovery of combustible matter