摘要
在国内外对高硅铝合金切削摩擦磨损特性的研究基础上,以正交试验法为基础,利用有限元仿真软件DEFORM-3D对金刚石涂层铣刀铣削高硅铝合金CE11过程进行虚拟仿真分析,并研究铣削用量的改变对刀具磨损的影响规律。基于仿真试验结果,对金刚石涂层刀具铣削高硅铝合金的铣刀磨损量试验数据进行极差分析,优选出最小磨损量的最佳切削用量方案,并通过试验验证了仿真结果的正确性。
On the basis of current domestic and foreign researches on friction and wear in cutting high silicon aluminum alloy,the milling process of high silicon aluminum alloy CE11 with diamond coated milling cutter is analyzed by the finite element simulation software DEFORM-3D based on the orthogonal experiment method.The effect of milling parameters on tool wear is also studied.According to the results of simulation experiment,the range analysis is made on the experimental data of milling cutter wear of high silicon aluminum alloy by diamond coated cutting tools and the optimal cutting parameters are selected.Finally,the correctness of the simulation results is verified by experiments.
作者
余宗宁
周利平
刘小莹
陈涤
Yu Zongning;Zhou Liping;Liu Xiaoying;Chen Di
出处
《工具技术》
2019年第3期33-37,共5页
Tool Engineering
基金
四川省科技厅应用基础研究计划(2015JY0276)
四川省教育厅自然科学重点研究项目(18ZA0454)
西华大学重点科研基金(Z1020212)
关键词
高硅铝合金
金刚石涂层铣刀
仿真
极差分析
摩擦磨损
high silicon aluminum alloy
diamond coated milling cutter
simulation
range analysis
friction and wear
