期刊文献+

空调导风板反变形分析和模具设计 被引量:2

Reverse deformation analysis and mold design of air conditioning wind deflector
下载PDF
导出
摘要 空调导风板进行了反变形分析和模具设计。在反变形分析时,考虑了实际装配约束,优化了工艺参数,通过选择合理的比例因子输出了符合设计要求的反变形模型,而且在不考虑收缩的情况下,设计出了合格的模具。 Taking air conditioning wind deflector as an example,the reverse deformation analysis and mold design were carried out.In the reverse deformation analysis,the actual assembly constraints was considered,the process parameters were optimized.The reverse deformation model is output to meet the design requirements by choosing a reasonable scale factor.Finally the qualifed mold was designed without considering shrinkage.
作者 王鑫 李立尧 敖杰 WANG Xin;LI Liyao;AO Jie(College of Mechanical Engineering,Henan University of Engineering,Zhengzhou 451191,China)
出处 《河南工程学院学报(自然科学版)》 2019年第1期63-65,共3页 Journal of Henan University of Engineering:Natural Science Edition
关键词 反变形 装配约束 收缩 模具 reverse deformation assembly constraints shrinkage mold
  • 相关文献

参考文献2

二级参考文献14

  • 1Fei Yin,Huajie Mao,Lin Hua,Wei Guo,Maosheng Shu.Back Propagation neural network modeling for warpage prediction and optimization of plastic products during injection molding[J].Materials and Design.2010(4)
  • 2Babur Ozcelik,Ibrahim Sonat.Warpage and structural analysis of thin shell plastic in the plastic injection molding[J].Materials and Design.2008(2)
  • 3Xuan-Phuong Dang.General frameworks for optimization of plastic injection molding process parameters[J].Simulation Modelling Practice and Theory.2014
  • 4M.D. Azaman,S.M. Sapuan,S. Sulaiman,E.S. Zainudin,A. Khalina.Shrinkages and warpage in the processability of wood-filled polypropylene composite thin-walled parts formed by injection molding[J].Materials and Design.2013
  • 5Xiaoxin Wang,Guoqun Zhao,Guilong Wang.Research on the reduction of sink mark and warpage of the molded part in rapid heat cycle molding process[J].Materials and Design.2013
  • 6Kuo-Ming Tsai.Runner design to improve quality of plastic optical lens[J].The International Journal of Advanced Manufacturing Technology.2013(1)
  • 7Yu Wang,Kai-Min Yu,Charlie C.L. Wang,Yunbo Zhang.Automatic design of conformal cooling circuits for rapid tooling[J].Computer-Aided Design.2011(8)
  • 8Ding Hua Zhang,Rui Song Jiang,Jian Ling Li,Wen Hu Wang,Kun Bu.Cavity optimization for investment casting die of turbine blade based on reverse engineering[J].The International Journal of Advanced Manufacturing Technology.2010(9)
  • 9Ching-Piao Chen,Ming-Tsan Chuang,Yun-Hsiang Hsiao,Yung-Kuang Yang,Chih-Hung Tsai.Simulation and experimental study in determining injection molding process parameters for thin-shell plastic parts via design of experiments analysis[J].Expert Systems With Applications.2009(7)
  • 10S.H. Tang,Y.J. Tan,S.M. Sapuan,S. Sulaiman,N. Ismail,R. Samin.The use of Taguchi method in the design of plastic injection mould for reducing warpage[J].Journal of Materials Processing Tech.2006(1)

共引文献14

同被引文献8

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部