期刊文献+

电弧焊接钢板过程中光谱强度研究

下载PDF
导出
摘要 利用光谱法研究电弧焊接钢板过程中焊接光谱强度的周期性变化规律,在相同的焊接条件下得到了光谱峰值强度与时间的关系,分析得出焊接光谱峰值的周期性变化规律,其周期性变化过程与焊接过程的熔滴过渡过程机理相对应,同时其波峰强度值随波长的规律性变化与焊接过程离子浓度的变化规律相吻合。 The periodic variation of welding spectral intensity in the process of arc welding steel plate is studied by spectroscopy.the relationship between spectral peak intensity and time is obtained under the same welding conditions,and the periodic variation law of welding spectral peak value is obtained.The periodic change process corresponds to the droplet transfer process mechanism of the welding process,and the regular change of the wave peak intensity with the wavelength is consistent with the change of ion concentration in the welding process.
出处 《科技创新与应用》 2019年第8期63-65,共3页 Technology Innovation and Application
基金 国家自然科学基金青年基金(编号:41404109)
关键词 电弧焊接 光谱法 周期性变化 熔滴过渡 arc welding spectroscopy periodic change droplet transfer
  • 相关文献

参考文献3

二级参考文献18

  • 1李桓,李俊岳,李益山,韦福水.钨极氩-氮电弧的高热特性[J].焊接学报,1993,14(2):125-131. 被引量:13
  • 2宋永伦.焊接电弧等离子体的光谱诊断法及其应用的研究[M].天津:天津大学,1990..
  • 3李俊岳 韦福水 等.焊接电弧氢的测试法的研究[J].焊接学报,1987,8(3):123-132.
  • 4W Lucas and D Howse. Activating flux-increasing the performance and productivity of the TIG and Plasma processes. Welding & Metal Fabrication, Jan 1996:11 - 17.
  • 5Troy Paskell etc. GTAW Flux Increases Weld Joint Penetration. Welding Journal, April 1997:57 - 62.
  • 6Y M ZHANG and B ZHANG. Double-Sided Arc Welding Increases Weld Joint Penetration. Welding Journal, 1998 (6) : 57 -61.
  • 7Y M ZHANG and B ZHANG. Welding Aluminum Alloy 6061 with the Opposing Dual-Torch GTAW Process. Welding Research Supplement, 1999 (6) : 202 - 206.
  • 8Y M ZHANG, C Pan and A T Male. Welding of austenitic stainless steel using double sided arc welding process. Materials Science and Technology, 2001 ( 10 ) : 1280 - 1284, Vol. 17.
  • 9潘存海,杜素梅,李桓,李俊岳.水下等离子弧局部热力学平衡态的判定[J].机械工程学报,1997,33(5):12-16. 被引量:8
  • 10韩国明,李俊岳,吴钊,柳刚.焊接电弧紫外光谱的分布特征[J].焊接学报,1999,20(4):213-218. 被引量:10

共引文献44

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部