摘要
针对某型号齿轮马达边盖工件,在加工过程中出现的产能及精度达不到要求的问题,通过分析检测数据得出产生加工误差的主要原因,优化后的工艺提高了边盖圆跳动和同轴度的精度。生产加工证明:新的加工工艺使得边盖的合格率提高到96%、加工效率提高了20%。
Aiming at the problem that the productivity and precision of the side cover parts of a gear motor cannot meet the requirement in the process of machining, the main reason of machining error is obtained by analyzing the testing data, and the optimized process improves the precision of the side cover circle proper alignment and Circle run- out. The production process proves that the qualified rate of the edge cover is increased to 96% and the processing efficiency is increased by 20%.
作者
陈祥林
郭秀华
CHEN Xianglin;GUO Xiuhua(Colledge of Mechanical and Electrical Engineering, Suzhou Vocational University, Suzhou 215104,CHN;Department of Mechanical and Electrical Engineering, Suzhou Institute of Trade & Commerce , Suzhou 215009, CHN)
出处
《制造技术与机床》
北大核心
2019年第4期103-105,111,共4页
Manufacturing Technology & Machine Tool
基金
苏州市职业大学‘青蓝工程’资助项目(3170099)
关键词
马达边盖
同轴度
圆跳动
加工工艺
夹具
the motor side cover
proper alignment
circle run-out
processing technique
fixture
