摘要
We report a correlative study of strain distribution and grain structure in the Al matrix of a hot-extruded SiC particulate-reinforced Al composite(SiC_p/2014 Al). Finite element method(FEM) simulation and microstructure characterization indicate that the grain structure of the Al matrix is affected by the interparticulate strain distribution in the matrix during the process. Both electron-backscattered diffraction(EBSD) and selected-area electron diffraction(SAED) indicated localized misorientation in the Al matrix after hot extrusion. Scanning transmission electron microscopy(STEM) revealed fine and recrystallized grains adjacent to the Si C particulate and elongated grains between the particulates. This result is explained in terms of recrystallization under an interparticulate strain distribution during the hot extrusion process.
We report a correlative study of strain distribution and grain structure in the Al matrix of a hot-extruded SiC particulate-reinforced Al composite(SiC_p/2014 Al). Finite element method(FEM) simulation and microstructure characterization indicate that the grain structure of the Al matrix is affected by the interparticulate strain distribution in the matrix during the process. Both electron-backscattered diffraction(EBSD) and selected-area electron diffraction(SAED) indicated localized misorientation in the Al matrix after hot extrusion. Scanning transmission electron microscopy(STEM) revealed fine and recrystallized grains adjacent to the Si C particulate and elongated grains between the particulates. This result is explained in terms of recrystallization under an interparticulate strain distribution during the hot extrusion process.
基金
financially supported by the National Basic Research Program of China (973) (No. 2012CB619600)
