摘要
基于面阵红外地球敏感器在桌面联试及半物理仿真测试中的需要,文中设计一种电激励信号源来模拟卫星在不同姿态下面阵红外地球敏感器检测到的地平圆位置,通过上位机软件发送姿态信息至电激励信号生成装置,经过FPGA作为红外地球敏感器的输入,验证红外地球敏感器的性能指标,完成面阵红外地球敏感器的闭环测试。试验验证表明,该装置能够模拟地平圆的不同位置,在面阵红外地球敏感器的桌面联试及半物理仿真测试中发挥重要作用。
Based on the needs of array infrared earth sensor’s desktop joint test and semi physical simulation test,an electric excitation signal source is designed in this paper to simulate the position of the earth detected by the array infrared earth sensor. The attitude information is sent to the electrical excitation device through the upper computer software. After the analysis of the FPGA module,the simulated ground circle is drawn,and the analog ground circle is superposed with the signal of the detector as the input of the infrared earth sensor to verify the performance index of infrared earth sensor and complete the closed loop test. The experimental verification showed that the device can simulate the different positions of the ground circle,and played an important role in the desktop test and semi physical simulation test.
作者
李勇
王钊
雒莎
崔维鑫
LI Yong;WANG Zhao;LUO Sha;CUI Wei-xin(Shanghai Institute of Technical Physics,Chinese Academy of Science,Shanghai 200083,China)
出处
《电子设计工程》
2019年第7期5-9,共5页
Electronic Design Engineering
基金
国家重大科学仪器设备开发专项(2013YQ47076706)
关键词
面阵红外地球敏感器
电激励
姿态信息
FPGA
array infrared earth sensor
electrical excitation signal
attitude angle
FPGA