摘要
This research explores the prospect of fabricating a face-centered cubic(fcc) Ni-base alloy cladding(Inconel 690) on an fcc Fe-base alloy(316 L stainless-steel) having improved mechanical properties and reduced sensitivity to corrosion through grain boundary and microstructure engineering concepts enabled by additive manufacturing(AM) utilizing electron-beam powder bed fusion(EPBF). The unique solidification and associated constitutional supercooling phenomena characteristic of EPBF promotes[100] textured and extended columnar grains having lower energy grain boundaries as opposed to random, high-angle grain boundaries, but no coherent {111} twin boundaries characteristic of conventional thermo-mechanically processed fcc metals and alloys, including Inconel 690 and 316 L stainless-steel.In addition to [100] textured grains, columnar grains were produced by EPBF fabrication of Inconel 690 claddings on 316 L stainless-steel substrates. Also, irregular 2–3 μm diameter, low energy subgrains were formed along with dislocation densities varying from 108 to 109 cm^2, and a homogeneous distribution of Cr_(23)C_6 precipitates. Precipitates were formed within the grains(with ~3 μm interparticle spacing),but not in the subgrain or columnar grain boundaries. These inclusive, hierarchical microstructures produced a tensile yield strength of 0.527 GPa, elongation of 21%, and Vickers microindentation hardness of 2.33 GPa for the Inconel 690 cladding in contrast to a tensile yield strength of 0.327 GPa, elongation of 53%, and Vickers microindentation hardness of 1.78 GPa, respectively for the wrought 316 L stainlesssteel substrate. Aging of both the Inconel 690 cladding and the 316 L stainless-steel substrate at 685?C for50 h precipitated Cr_(23)C_6 carbides in the Inconel 690 columnar grain boundaries, but not in the low-angle(and low energy) subgrain boundaries. In contrast, Cr_(23)C_6 carbides precipitated in the 316 L stainless-steel grain boundaries, but not in the low energy coherent {111} twin boundaries. Consequently, the Inconel690 subgrain boundaries essentially serve as surrogates for coherent twin boundaries with regard to avoiding carbide precipitation and corrosion sensitization.
This research explores the prospect of fabricating a face-centered cubic(fcc) Ni-base alloy cladding(Inconel 690) on an fcc Fe-base alloy(316 L stainless-steel) having improved mechanical properties and reduced sensitivity to corrosion through grain boundary and microstructure engineering concepts enabled by additive manufacturing(AM) utilizing electron-beam powder bed fusion(EPBF). The unique solidification and associated constitutional supercooling phenomena characteristic of EPBF promotes[100] textured and extended columnar grains having lower energy grain boundaries as opposed to random, high-angle grain boundaries, but no coherent {111} twin boundaries characteristic of conventional thermo-mechanically processed fcc metals and alloys, including Inconel 690 and 316 L stainless-steel.In addition to [100] textured grains, columnar grains were produced by EPBF fabrication of Inconel 690 claddings on 316 L stainless-steel substrates. Also, irregular 2–3 μm diameter, low energy subgrains were formed along with dislocation densities varying from 108 to 109 cm^2, and a homogeneous distribution of Cr_(23)C_6 precipitates. Precipitates were formed within the grains(with ~3 μm interparticle spacing),but not in the subgrain or columnar grain boundaries. These inclusive, hierarchical microstructures produced a tensile yield strength of 0.527 GPa, elongation of 21%, and Vickers microindentation hardness of 2.33 GPa for the Inconel 690 cladding in contrast to a tensile yield strength of 0.327 GPa, elongation of 53%, and Vickers microindentation hardness of 1.78 GPa, respectively for the wrought 316 L stainlesssteel substrate. Aging of both the Inconel 690 cladding and the 316 L stainless-steel substrate at 685?C for50 h precipitated Cr_(23)C_6 carbides in the Inconel 690 columnar grain boundaries, but not in the low-angle(and low energy) subgrain boundaries. In contrast, Cr_(23)C_6 carbides precipitated in the 316 L stainless-steel grain boundaries, but not in the low energy coherent {111} twin boundaries. Consequently, the Inconel690 subgrain boundaries essentially serve as surrogates for coherent twin boundaries with regard to avoiding carbide precipitation and corrosion sensitization.
基金
Support for this project was provided by US Department of Energy grant DE-SC0011826
