摘要
通过对化学成分的有效控制,采用小角度铣削铸锭侧面,以及应用临界变形理论,实现了0359铝合金高频焊管用板材减薄至0. 23 mm厚度,保证板材减薄的同时,其性能也得到保证。
The thinning process of 0359 aluminum alloy sheet to the thickness of 0. 23 mm for high frequency welded pipe is realized through the effective control of chemical compositions,small angle milling on the ingot side surface, and the use of critical deformation theory, Both the performance and the thinning can be guaranteed at the same time.
作者
王强
车德财
谭树栋
刘玉龙
刘世雷
张云龙
WANG Qiang;CHE De-cai;TAN Shu-dong;LIU Yu-long;LIU Shi-lei;ZHANG Yun-long(Northeast Light Alloy Co.,Ltd.,Harbin 150060,China;Central South University,Changsha 410000,China)
出处
《轻合金加工技术》
CAS
北大核心
2019年第3期24-28,共5页
Light Alloy Fabrication Technology
关键词
0359铝合金
化学成分
小角度铣面
临界变形
0359 aluminum alloy
chemical composition
small angle milling
critical deformation
