期刊文献+

包覆方式对人造石墨负极性能的影响 被引量:2

Effect of Envelope Method on the Negative Properties of Artificial Graphite
下载PDF
导出
摘要 以两种不同的石油焦作为原料,在相同的工艺条件下改变包覆工序,制备出不同包覆方式的人造石墨负极材料,并研究对比其性能差异探讨包覆方式对锂离子电池人造石墨负极材料性能的影响及优劣势。结果表明:前包覆方式制备的锂离子电池人造石墨负极材料具有容量发挥高的特点;后包覆方式制备的锂离子电池人造石墨负极材料具有相对优异的循环性能。 Using two different kinds of petroleum coke as raw materials and changing the coating process under the same technological conditions,artificial graphite anode materials with different coating methods were prepared,and their performance differences were studied and compared.The effects of coating methods on the properties of artificial graphite anode materials for lithium ion batteries and their advantages and disadvantages were discussed.The results show that the artificial graphite anode material for lithium ion batteries prepared by pre-coating method has high capacity,and the artificial graphite anode material for lithium ion batteries prepared by post-coating method has relatively excellent cycling performance.
作者 王丽琼 韩团辉 蔡奉翰 WANG Li-qiong;HAN Tuan-hui;CAI Feng-han(Dalian Hongguang Lithium Industry Co.,Ltd.,Dalian 116450,China)
出处 《通信电源技术》 2019年第3期81-82,共2页 Telecom Power Technology
关键词 石油焦 人造石墨 负极材料 包覆 petroleum coke artificial graphite negative material coated
  • 相关文献

参考文献1

二级参考文献23

  • 1Umeno Tatsuo, Fukuda Kenji, Wang Hongyu, et al. Novel anode material for lithium-ion batteries: carbon-coated silicon prepared by thermal vapor decomposition [J].Chemistry Letters, 2001,30,1186-1188.
  • 2Larcher D, Mudalige C, Gharghouri M.Electrochemical insertion of Li and irreversibility in disorded carbons prepared from oxygen and sulfur-containing pitches [J]. Electrochimica Acta, 1999, 44: 4069-4072.
  • 3Matsumara Y, Wang S, Mondori J .Mechanism leading to irreversible capacity loss in Li ion rechargeable batteries[J]. J Electrochem Soc, 1995, 142: 2914-2918.
  • 4Nishijima M, Takeda Y, Imanishi N, et al. Li deintercalation and structural change in the lithium transition metal nitride Li3FeN2 [J].J Solid State Chem,1994,113: 205-210.
  • 5Yang J, Takeda Y, Imanishi N, et al. Novel composite anodes based on nano-oxides and Li2.6Co0.4N for lithium ion batteries [J]. Electrochim Acta, 2001,46:2659-2664.
  • 6Nishijima M, Tadokoro N, Takeda Y, et al. Li deintercalation-intercalation reaction and structural change in lithium transition metal nitride Li7MnN4 [J].J Electrochem Soc,1994,141: 2966-2971.
  • 7Nishijima M, Kagohashi T, Imanishi N, et al. Synthesis and electrochemical studies of a new anode material,Li3-xCoxN [J].Solid State Ionics,1996,83.107-111.
  • 8Shodai T, Okada S, Tobishima S, et al. Study of Li3-xMxN (M: Co, Ni or Cu) system for use as anode material in lithium rechargeable cells [J].Solid State Ionics, 1996,86-88: 785-789.
  • 9Shodai T, Okada S, Tobishimab S,et al. Anode performance of a new layered nitride Li3-xMxN [J]. J Power Sources, 1997,68: 515-518.
  • 10Takeda Y, Nishijima M, Yamahata M, et al. Lithium secondary batteries using a lithium cobalt nitride, Li2.6Co0.4N, as the anode [J].Solid State Ionics, 2000,130: 61-69.

共引文献12

同被引文献12

引证文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部