期刊文献+
任意字段
题名或关键词
题名
关键词
文摘
作者
第一作者
机构
刊名
分类号
参考文献
作者简介
基金资助
栏目信息

高速永磁无刷直流电机转子优化设计与试验研究 被引量：7

Optimal Design of Rotor Structure and Experimental Study on High Speed PM BLDC Motors
下载PDF
导出
摘要 高速永磁无刷直流电机具有功率密度高、体积小、效率高等优点,在很多领域有着广泛的应用。对比分析了不同的转子充磁方式和转子支撑结构对气隙磁场、齿槽转矩和转子动力学的影响,优化设计了平行充磁和两端式支撑结构的2.3kW、150000r/min高速永磁无刷直流电机样机和控制系统,进行了试验论证,试验研究表明:两端式轴承支撑结构的转子成功运行到100,000r/min以上。 High speed PM BLDC motors have been extensively developed and employed in industry applications,due to high efficiency and high power density.The influences of rotor magnetizations and rotor support structures on the air-gap field,cogging torque and rotor dynamic of high speed brushless DC motor were comparatively studied.A rating of 2.3 kW,150 kr/min high speed brushless DC motor and the control system were optimally designed.The experimental results show that two end support structure is successfully running up to 100krpm.
作者 周凤争 孟庆霖 孟峥峥 王浩鸣 朱晓辉 ZHOU Fengzheng;MENG Qinglin;MENG Zhengzheng;WANG Haoming;ZHU Xiaohui(Electric Power Research Institute of State Grid Tianjin Electric Power Corporation,Tianjin 300384,China;Ministry of Audit of State Grid Tianjin Electric Power Corporation,Tianjin 300151,China)
机构地区 国网天津市电力公司电力科学研究院 国网天津市电力公司审计部
出处 《微电机》 北大核心 2019年第3期5-8,共4页 Micromotors
关键词 高速电机 永磁无刷直流电机 充磁方式 转子动力学 high speed motor brushless DC motor magnetization rotor dynamic
分类号 TM361 [电气工程—电机] TM355 [电气工程—电机]
  • 相关文献

参考文献1

二级参考文献20

  • 1王继强,王凤翔,鲍文博,关恩录.高速永磁电机转子设计与强度分析[J].中国电机工程学报,2005,25(15):140-145. 被引量：96
  • 2Gieras J F. Comparison of high-power high-speed machines: cage induction versus switched reluctance motors [A]. 1999 IEEE Aericon-5^th Conference in Africa[C]. South Africa: IEEE, 1999:675 - 678.
  • 3Wang F X,Zheng W P,Zong M, et al. Design considerations of high-speed PM generators for microturbines[A]. China Electric Power Research Institute. 2002 IEEE International Conference on Power System Technology Proceedings [C]. Kuming: Yunnan Science and Technology Press,2002:158 - 162.
  • 4Aglen O, Andersson A. Thermal analysis of a high speed generator [A]. IEEE-IAS. Conference Record ofthe IEEE Industry Applicatons Society Thirty Einght Annual Meeting [C]. Salt Lake City: IEEE,2003 : 547- 554.
  • 5Aglen O. Loss calculation and thermal analysis of a high-speed generator [A]. IEEE Electric Machines and Drives Conference [C]. Madison: IEEE, 2003 : 1117 -1123.
  • 6Wang F X, Zong M, Zheng W P, et al. Design features of high speed PM machines [A]. Proceedings of the Sixth International Conference on Electrical Machines and Systems [C]. Beijing: International Academic Publishers Word Publishing Corporation, 2003 : 66 - 70.
  • 7Binder A, Schneider T, Klohr M. Fixation of buried and surface mounted magnets in high-speed permanent magnet synchronous motors [A]. Conference Record of the IEEE Industry Applications Society Fortieth Annual Meeting [ C], Hong Kong: IEEE, 2005:2843 -2848.
  • 8Yu T, Wang F X, Wang J Q, et al. Investigation on structure of suitor core and winding for high speed PM machines [A]. Proceedings of the Eighth International Conference on Electrical Machines and Systems [C].Beijng: International Academic Publishers Word Publishing Corporation, 2005 : 903 - 906.
  • 9Schatzer C, Binder A. Design optimization of a high speed permanent magnet machine with the VEKOPT algorithm [ C/CD]. Roma: Conference Record of the IEEE Industry Applications Society Thirty Fifth Annual Meeting(IEEF-ISA'2000) ,2000.
  • 10Filatov A V, Maslen E H, Gillies G T, A method of noncontact suspension of rotating bodies using electromagnetic forces [J ]. Journal of Applied Physics, 2002,91(4):2355-2371.

共引文献168

同被引文献49

引证文献7

二级引证文献12

微电机
2019年 第3期

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部