摘要
针对传统立体模型测量方法效率低下、测量精度受测量人员技术水平影响较大的问题,根据全站仪的工作原理提出了基于全站仪的岩体边坡控制测量和结构面产状检验方法,在对边坡控制测量和结构面产状检验的原理进行分析的基础上,以某典型地质条件为例,进行了实地验证。实地测量显示,该方法克服了传统测量方法效率低下、精度差的缺点,极大地提升了地质测量的准确性和测量效率。
In view of the low efficiency of traditional stereoscopic model measurement methods, the measurement accuracy is greatly affected by the technical level of the surveyors. According to the working principle of total station, a method of rock slope control survey and structural surface inspection based on total station is put forward. On the basis of analyzing the principle of slope control survey and structural surface occurrence inspection, a typical geological condition is taken as an example. Field tests were conducted. The field survey shows that this method overcomes the shortcomings of low efficiency and poor precision of traditional surveying methods, and greatly improves the accuracy and efficiency of geological survey.
作者
刘雄辉
Liu Xionghui(Pingshu Coal Industry Co., Ltd., Shouyang Shanxi 045499)
出处
《机械管理开发》
2019年第3期96-98,共3页
Mechanical Management and Development
关键词
全站仪
边坡测量
产状检验
total station
slope survey
occurrence inspection