期刊文献+

三嗪二硫醇类缓蚀剂在铜合金表面的吸附行为及缓蚀性能研究 被引量:2

Adsorption behavior and corrosion inhibition performance of triazinedithiol inhibitor on copper alloysurface
下载PDF
导出
摘要 目的研究一种均三嗪二硫醇类缓蚀剂(DBN)对铜合金耐蚀作用并分析其在铜合金表面的吸附行为。方法通过电化学方法和盐水实验研究质量浓度为3.5%NaCl溶液中DBN对铜合金的缓蚀作用;建立吸附模型分析缓蚀剂分子的吸附行为。结果铜合金的缓蚀效率随着DBN浓度的增加而增大;当DBN浓度为1.0mM时,缓蚀效率高达97.7%;DBN在铜合金表面的吸附遵循Langmuir吸附等温模型。结论添加DBN缓蚀剂可有效抑制铜合金在NaCl溶液中的腐蚀。 Purposes- To study the corrosion inhibition effect of a kind of triazinedithiol (DBN) on copper alloy and analyze its adsorption behavior on the surface of copper alloy. Methods- The corrosion inhibition effect of DBN in 3.5%(wt)NaCl solution on copper alloy was studied with electrochemical method and salt water test.The adsorption model was established to analyze the adsorption behavior of the inhibitor molecules. Result - The corrosion inhibition efficiency improved with the increase of DBN concentration,and the corrosion inhibition efficiency reached 97.7% when the concentration of DBN was 1.0 mM.The adsorption of DBN on copper alloy follows Langmuir adsorption isotherm model. Conclusion- DBN inhibitor can effectively inhibit the corrosion of copper alloy in sodium chloride solution.
作者 赵倩 刘洪 郭敏 尚晓博 杨桦 ZHAO Qian;LIU Hong;GUO Min;SHANG Xiao-bo;YANG Hua(Shaanxi Key Laboratory of Disaster Monitoring and Mechanism Simulation,College of Geography and Environment,Baoji University of Arts and Sciences,Baoji 721013,Shaanxi,China;Shaanxi Changling Electronic Tech.Co.Ltd.,Baoji 721006,Shaanxi,China;Shaanxi Baoguang Vacuum Electric Device Co.Ltd.,Baoji 721006,Shaanxi,China)
出处 《宝鸡文理学院学报(自然科学版)》 CAS 2019年第1期21-25,38,共6页 Journal of Baoji University of Arts and Sciences(Natural Science Edition)
基金 陕西省高校科协青年人才托举计划资助项目(20180419) 陕西省科技厅自然科学基础研究计划资助项目(2018JQ5191) 宝鸡文理学院博士科研启动项目(ZK2018044) 宝鸡文理学院2018年大学生创新创业训练计划项目(201810721005)
关键词 缓蚀剂 铜合金 三嗪硫醇 电化学方法 corrosion inhibitor copper alloy triazinedithiol electrochemical method
  • 相关文献

参考文献1

二级参考文献14

  • 1NAKAI M,ETO T.New aspects of development of high strength aluminum alloys for aerospace applications[J].Mater Sci Eng A,2000,285:62-68.
  • 2CHEN G S,GAO M,WEI R P.Microconstituent-induced pitting corrosion in aluminum alloy 2024-T3[J].Corrosion,1996,52:8-15.
  • 3BUCHHEIT R G,GRANT R P,HLAVA P F,MCKENZIE B,ZENDER G L.Local dissolution phenomena associated with S phase (Al2CuMg) particles in aluminum alloy 2024-T3[J].J Electrochem Soc,1997,144:2621-2628.
  • 4VALIEV R Z,LANGDON T G.Principles of equal-channel angular pressing as a processing tool for grain refinement[J].Prog Mater Sci,2006,51:881-981.
  • 5MURAYAMA M,HORITA Z,HONO K.Microstructure of two-phase Al-1.7at% Cu alloy deformed by equal-channel angular pressing[J].Acta Mater,2001,49:21-29.
  • 6SON I J,NAKANO H,OUE S,KOBAYASHI S,FUKUSHIMA H,HORITA Z.Pitting corrosion resistance of ultrafine-grained aluminum processed by severe plastic deformation[J].Mater Trans,2006,47:1163-1169.
  • 7SON I J,NAKANO H,OUE S,KOBAYASHI S,FUKUSHIMA H,HORITA Z.Pitting corrosion resistance of anodized aluminum alloy processed by severe plastic deformation[J].Mater Trans,2007,48:21-28.
  • 8SON I J,NAKANO H,OUE S,KOBAYASHI S,FUKUSHIMA H,HORITA Z.Effect of annealing on the pitting corrosion resistance of anodized aluminum-magnesium alloy processed by severe plastic deformation[J].J Japan Inst Metal,2008,72:27-34.
  • 9IWAHASHI Y,HORITA Z,NEMOTO M,LANGDON T G.Factors influencing the equilibrium grain size in equal-channel angular pressing:Role of Mg additions to aluminum[J].Metallurgical and Mater Trans A,1998,29A:2503-2510.
  • 10HORITA Z,FURUKAWA M,NEMOTO M,LANGDON T G.Development of fine-grained structures using severe plastic deformation[J].Mater Sci Tech,2000,16:1239-1245.

共引文献4

同被引文献19

引证文献2

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部