摘要
激光白光光源具有亮度高、响应速度快和传输距离远等优点,在汽车照明、显示、工业照明及高铁舰船等远程照明领域获得广泛应用。然而,随着流明密度不断增加,对光转换材料提出了更高的要求。本文对激光照明用粉体、单晶、玻璃、陶瓷等光转换材料的国内外研究进展进行了综述;简要分析了当前光转换材料温度猝灭现象的主要原因;提出了实现高流明密度激光照明应用所需要解决的关键问题,最后对其发展趋势进行了展望。
Laser-based white-light source has the advantages of high brightness, fast response and far transmission distance. It is widely used in automotive lighting, display, industrial lighting, and remote lighting fields such as high-speed rail and ships. However, with the high lumen density of laser illumination source, higher requirements are proposed for the light-conversion materials. In this review, the research progress of light-converting materials such as powder, single crystal, glass and ceramics for laser illumination in recent years is reviewed. Then, the main causes of temperature quenching of current light-conversion materials are briefly analyzed. Finally, several key problems to be urgently solved are highlighted for the application of high-lumen density laser illumination, and its development trend is prospected.
作者
康健
张乐
甄方正
单迎双
马跃龙
陈浩
Jian Kang;Le Zhang;Fangzheng Zhen;Yingshuang Shan;Yuelong Ma;Hao Chen(Jiangsu Key Laboratory of Advanced Laser Materials and Devices, School of Physics Electronic Engineering, Jiangsu Normal University, Xuzhou 221116, China;School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China)
出处
《化学进展》
SCIE
CAS
CSCD
北大核心
2019年第2期322-336,共15页
Progress in Chemistry
基金
国家自然科学基金项目(No.61775088,51402133,61603160)
江苏高校优势学科建设工程资助项目(PAPD)
江苏省重点研发计划(No.BE2018062)
江苏省研究生科研与实践创新项目(No.KYCX18_2096,KYCX18_2097,KYCX18_2098,KYCX18_2099)
徐州市科技创新专项资金项目(No.KC16GZ014,KC16HQ236,KC16HQ237)资助.
关键词
激光照明
荧光陶瓷
高流明密度
高发光效率
laser illumination
florescent ceramic
high-lumen density
high luminous efficiency