摘要
柔性多状态开关是一种代替传统联络开关的电力电子装备,它能够满足智能配电网分布式电源的消纳、高供电可靠性等定制电力需求。本文对实现配电网柔性互联的柔性多状态开关的数学模型和工作原理进行详细分析,提出实现双端配电网络柔性互联的控制方式,并对双端配电网络在不同电压等级、电网频率、电压、相位下的柔性互联进行仿真分析。仿真结果证明了柔性多状态开关的可行性和优越性。
Flexible multi-state switch is a kind of power electronic equipment that replaces the traditional contact switch. It can satisfy the custom power demand such as smart distributed power distribution network as well as high reliability of power supply. The mathematical model and working principle of flexible multi-state switch for flexible interconnection of distribution network are analyzed in detail, and the control method of the flexible interconnection of dual-end distribution network is put forward. The flexible interconnection of two terminal distribution network is simulated in different voltage grades, power grid frequencies and voltage phase angles. The simulation results verify the feasibility and superiority of flexible multi-state switch.
作者
贾冠龙
陈敏
赵斌
陆翌
杨勇
Jia Guanlong;Chen Min;Zhao Bin;Lu Yi;Yang Yong(College of Electrical Engineering Zhejiang University Hangzhou 310027 China;State Grid Zhejiang Electric Power Research Institute Hangzhou 310014 China;State Grid Zhejiang Electric Power Co. Ltd Hangzhou 310000 China)
出处
《电工技术学报》
EI
CSCD
北大核心
2019年第8期1760-1768,共9页
Transactions of China Electrotechnical Society
基金
国家重点研发计划(2017YFB0903100)
国家电网公司科技项目(521104170043)资助
关键词
柔性多状态开关
电力电子装备
智能配电网
柔性互联
Flexible multi-state switch
power electronic equipment
smart distribution network
flexible interconnection