期刊文献+

Microstructural evaluation and nanohardness of an AlCoCuCrFeNiTi high-entropy alloy 被引量:6

Microstructural evaluation and nanohardness of an AlCoCuCrFeNiTi high-entropy alloy
下载PDF
导出
摘要 An AlCoCuCrFeNiTi high-entropy alloy(HEA) was prepared by mechanical alloying and sintering to study the effect of Ti addition to the widely studied AlCoCuCrFeNi system. The structural and microstructural characteristics were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM), and transmission electron microscopy(TEM). The formation of four micrometric phases was detected: a Cu-rich phase with a face-centered cubic(fcc) structure, a body-centered cubic(bcc) solid solution with Cu-rich plate-like precipitates(fcc), an ordered bcc phase, and a tetragonal structure. The XRD patterns corroborate the presence of a mixture of bcc-, fcc-, and tetragonal-structured phases. The Vickers hardness of the alloy under study was more than twice that of the AlCoCuCrFeNi alloy. Nanoindentation tests were performed to evaluate the mechanical response of the individual phases to elucidate the relationship between chemical composition, crystal structure, and mechanical performance of the multiphase microstructure of the AlCoCuCrFeNiTi HEA. An AlCoCuCrFeNiTi high-entropy alloy(HEA) was prepared by mechanical alloying and sintering to study the effect of Ti addition to the widely studied AlCoCuCrFeNi system. The structural and microstructural characteristics were investigated by X-ray diffraction(XRD), scanning electron microscopy(SEM), and transmission electron microscopy(TEM). The formation of four micrometric phases was detected: a Cu-rich phase with a face-centered cubic(fcc) structure, a body-centered cubic(bcc) solid solution with Cu-rich plate-like precipitates(fcc), an ordered bcc phase, and a tetragonal structure. The XRD patterns corroborate the presence of a mixture of bcc-, fcc-, and tetragonal-structured phases. The Vickers hardness of the alloy under study was more than twice that of the AlCoCuCrFeNi alloy. Nanoindentation tests were performed to evaluate the mechanical response of the individual phases to elucidate the relationship between chemical composition, crystal structure, and mechanical performance of the multiphase microstructure of the AlCoCuCrFeNiTi HEA.
出处 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2019年第5期634-641,共8页 矿物冶金与材料学报(英文版)
关键词 high-entropy ALLOYS mechanical ALLOYING microstructure NANOINDENTATION high-entropy alloys mechanical alloying microstructure nanoindentation
  • 相关文献

参考文献1

二级参考文献1

共引文献4

同被引文献69

引证文献6

二级引证文献22

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部