摘要
以H65铸态合金为研究对象,添加不同含量的微量元素(Ti、Zr、Y、Co)。采用定性比较和定量测量的方式对合金铸态晶粒尺寸进行了分析。结果表明:Ti、Zr、Co三种元素的添加,对H65合金铸态组织可以起到细化作用;其中,以Zr元素的细化效果最为明显,添加量为0.10 %时,细化后的铸态平均晶粒直径仅为65.98 μm,是未添加时的17.3 %。
H65 alloy as-cast is the research object,and added microelements Ti,Zr,Y,Co with different content to it. This paper studied the effects of these microelements on the alloy as-cast organization by qualitative comparison and quantitative measurement. The results show that: adding Ti, Zr and Co has good effect on reducing the grain size of H65 alloy as-cast. The alloy grain average diameter is 65.98μm, which is 17.3 % when not adding any microelement, as the content of Zr is 0.10 %, and that is the best effect in the authors’ experiment.
作者
吴语
柳瑞清
WU Yu;LIU Rui-qing(Jiangxi Copper Technology Research Institute Co., Ltd., Nanchang 330096, Jiangxi, China;National Copper Smelting and Fabrication Engineering Research Center, Nanchang 330096, Jiangxi, China;Jiangxi University of Science and Technology, Ganzhou 341000, Jiangxi, China)
出处
《铜业工程》
CAS
2019年第2期90-92,共3页
Copper Engineering