摘要
干旱—半干旱地区第四纪冲洪积扇蕴含着丰富的气候与构造信息,划分并描述不同时期的冲洪积扇单元及其地貌特征是开展第四纪冲洪积扇研究的重要步骤。野外考察等传统方法是对冲洪积扇进行描述与填图的最重要的途径之一,但在此之前对冲洪积扇进行大范围的自动化地貌初步分级则可为地貌填图提供指导,从而提高后续的野外工作效率。文中借助航空影像生成的0. 2m分辨率数字高程模型提取老虎山地区各冲洪积扇单元的起伏度与粗糙度,实现对各冲洪积扇单元的分类与差异探讨。研究表明,随着提取窗口尺寸的增大,粗糙度迅速增大,而当提取窗口增大到一定程度后粗糙度过渡为缓慢增大并达到稳定的状态。在尺寸为8m×8m的滑动取样窗口下,起伏度与粗糙度随着冲洪积扇年龄的增加,呈现先减小而后增大的趋势,这恰好反映了冲洪积扇的动态演化过程。
Range-front alluvial fan deposition in arid and semiarid environments records vast amounts of climatic and tectonic information. Differentiating and characterizing alluvial fan morphology is an important part in Quaternary alluvial fan research. Traditional method such as field observations is a most important part of deciphering and mapping the alluvial fan. Large-scale automatically mapping of alluvial fan stratigraphy before traditional field observations could provide guidance for mapping alluvial fan morphology,thus improving subsequent field work efficiency. In this research,highresolution topographic data were used to quantify relief and roughness of alluvial fan within the Laohushan. These data suggest that mean surface roughness plotted against the size of the moving window is characterized by an initial increase in surface roughness with increased window size,but it shows no longer increase as a function of windows size. These data also suggest that alluvial fans in this study site smooth out with time until a threshold is crossed where roughness increases at greater wavelength with age as a result of surface runoff and headward tributary incision into the oldest surfaces which suggests the evolution process of alluvial fan.Researchers usually differentiate alluvial morphology by mapping characteristics of fan surface in the field by describing surface clast size, rock varnish accumulation, and desert pavement development and analysis of aerial photographs or satellite imagery. Recently,the emergence of highresolution topographic data has renewed interest in the quantitative characterization of alluvial and colluvium landforms. Surface morphology that fan surface initially tends to become smoother with increasing age due to the formation of desert pavement and the degradation of bar-and-swale topography and subsequently,landforms become more dissected due to tectonics and climatic change induced increased erosion and channelization of the surface with time is widely used to distinguish alluvial fan types. Those characteristics would reflect various kinds of morphology metrics extracted from high-resolution topographic data. In the arid and semiarid regions of northwestern China,plenty of alluvial fans are preserved completely for lack of artificial reforming,and there exists sparse surface vegetation. In the meantime,range-front alluvial fan displaced by a number of active faults formed a series of dislocated landforms with different offsets which is a major reference mark in fault activity research. In this research,six map units(Qf6-Qf1),youngest to oldest,were observed in the study area by mapping performed by identifying geomorphic features in the field that are spatially discernible using hill-shade and digital orthophoto map. Alluvial fan relief and roughness were computed across multiple observation scales(2 m×2 m to 100 m×100 m) based on the topographic parameters of altitude difference and standard deviation of slope,curvature and aspect.In this research,mean relief keeps increasing with increased window size while mean surface roughness is characterized by a rapid increase over wavelengths of 6 ~ 15 m,representing the typical length scale of bar-and-swale topography. At longer wavelengths,surface roughness values increase by only minor amounts,suggesting the topographic saturation length is 6 ~ 15 m for those fan surfaces in which saturation length of standard deviation of curvature is less than 8 m. Box and whisker plot of surface roughness averaged over 8 m2 for each alluvial fan unit in the study area suggests that the pattern of surfaces smoothing out with age and then starting to become rougher again as age increases further beyond Qf4 or Qf3 unit. The younger alluvial fan is characterized by prominent bar-and-swale while the older alluvial fan is characterized by tributaries headward incision. Cumulative frequency distributions of relief and surface roughness in Figure 8 are determined in an 8 m by 8 m moving window for the comparison of six alluvial fan units in the northeast piedmont of Laohushan. From these distributions we know that Qf6 and Qf1 reflect the prominent relief which is related to bar-and-swale and tributaries headward incision respectively,while Qf4 and Qf3 reflect the moderate relief which is related to subdued topography.Surface roughness,in addition to facilitating the characterization of individual fan units,lends insight to alluvial landform development. We summarize an alluvial landform evolutionary scheme which evolves four stages depending on characteristics of alluvial fan morphology development and features of relief and roughness. The initial stage in this study site is defined as the active alluvial fan channels with bars of coarse cobbles and boulders and swales consisting of finer-grained pebbles and sand which could be reflected by high mean relief and mean roughness values. As time goes,bar-andswale topography is still present,but an immature pavement,composed of finer grained clasts,has started to form. In the third stage,the bar-and-swale topography on the fan surface is subdued,yet still observable,with clasts ranging from pebbles to cobbles in size and there exists obvious headward tributary incision. Eventually,tributary channels form from erosion by surface runoff. Headward incision of these tributaries wears down the steep walls of channels that are incised through the stable,planar surface,transforming the oldest alluvial landforms into convex hillslopes,leaving only small remnants of the planar surface intact. Those evolutionary character suggests that alluvial fans in this area smooth out with time,however,relief or roughness would be translated to increase at greater wavelength with age until a threshold is crossed.This research suggests that relief and roughness calculated from high-resolution topographic data of this study site could reflect alluvial fan morphology development and provide constraint data to differentiate alluvial fan unit.
作者
韩龙飞
刘静
袁兆德
邵延秀
王伟
姚文倩
王鹏
梁欧博
徐心悦
HAN Long-fei;ZENG Jing;YUAN Zhao-de;SHAO Yan-xiu;WANG Wei;YAO Wen-qian;WANG Peng;LIANG Ou-bo;XU Xin-yue(State Key Laboratory of Earthquake Dynamics, Institute of Geology, China Earthquake Administration, Beijing 100029, China;Lanzhou Institute of Seismology, China Earthquake Administration, Lanzhou 730000, China;Institute of Crustal Dynamics, China Earthquake Administration, Beijing 100085, China)
出处
《地震地质》
EI
CSCD
北大核心
2019年第2期251-265,共15页
Seismology and Geology
基金
地震动力学国家重点实验室课题(LED2017A01)
中国地震局地质研究所基本科研业务专项(IGCEA1814)
中国地震局川滇国家地震监测预报实验场项目(2017CESE0102)
国家自然科学基金(41761144065)共同资助
关键词
冲洪积扇
高精度地形数据
起伏度
粗糙度
自动划分
地貌演化
alluvial-proluvial fan
high-resolution terrain data
relief
roughness
automatic division
landform evolution