期刊文献+

改性双马来酰亚胺/苯并嗪共混树脂性能的研究 被引量:3

Study on the property of modified bismaleimide and benzoxazine blend
下载PDF
导出
摘要 双酚A型苯并嗪(BOZ)与改性双马来酰亚胺(m-BMI)以不同比例共混制备了m-BMI/BOZ浇铸体及其玻璃纤维复合材料,研究了m-BMI/BOZ树脂体系的固化特性和力学性能。结果表明,m-BMI/BOZ树脂体系的凝胶时间随m-BMI含量的增加而缩短。体系固化过程中出现两个放热峰,其特征固化峰值温度随m-BMI含量的增加而降低。浇铸体和层压板的弯曲强度、弯曲模量和冲击强度随m-BMI含量的提高显著增强。 The bisphenol A based benzoxazine(BOZ)and the modified bismaleimide(m-BMI)were blended in various proportions,and the m-BMI/BOZ casting body and its glass fiber composites was prepared,and the curing characteristics and mechanical properties of m-BMI/BOZ resin systems were studied.The results showed that the gel time of m-BMI/BOZ was shortened with the increase of m-BMI content.The curing reaction of m-BMI/BOZ had two exothermic peak,and the peak temperature of typical curing exotherm was decreased with increasing m-BMI content.The flexural strength,flexural modulus and impact strength of casting body and laminate increased significantly with increasing m-BMI content.
作者 段宪法 李玲 赵晓芳 于永建 刘翔宇 Duan Xianfa;Li Ling;Zhao Xiaofang;Yu Yongjian;Liu Xiangyu(School of Materials Science and Engineering,North University of China,Taiyuan 030051)
出处 《化工新型材料》 CAS CSCD 北大核心 2019年第4期96-99,共4页 New Chemical Materials
关键词 苯并噁嗪 双马来酰亚胺 复合材料 固化特性 力学性能 benzoxazine bismaleimide composite curing characteristics mechanical property
  • 相关文献

参考文献6

二级参考文献38

  • 1郭茂,凌鸿,郑林,顾宜.苯并噁嗪和双马来酰亚胺共混树脂性能的研究[J].热固性树脂,2008,23(1):4-7. 被引量:15
  • 2陈平,刘胜平,宋永贤,彭新生.乙酰丙酮金属络合物对酸酐固化环氧树脂体系潜伏性促进作用的研究[J].高分子学报,1993,3(4):485-489. 被引量:24
  • 3赵庆来,曾科,韩勇,唐艳,周柯,唐文睿,杨刚.含马来酰亚胺和烯丙基醚的苯并噁嗪的合成与性能[J].高分子材料科学与工程,2007,23(3):51-54. 被引量:10
  • 4Hatsuo I, Allen D J. Mechanical characterization of benzoxazine and epoxy [ J ]. Polymer, 1996,37 (20) :4 487 - 4 495.
  • 5Espinosa M A, Galia M, Cadiz V. Novel phosphorilated flame retardant thermosets : epoxy-benzoxazine-novolac systems [ J ]. Polymer,2004,45 ( 18 ) :6103 - 6109.
  • 6Jang J, Hojung Yang. Toughness improvement of carbon-fibre/polybenzoxazine composites by rubber modification [ J ]. Composites Science and Technology,2000,60 ( 3 ) :457 - 463.
  • 7Takeichi T, Yong Guo, Rimdusit S. Performance improvement of polybenzoxazine by alloying with polyimide: effect of preparation method on the properties [ J ]. Polymer, 2005,46 ( 13 ) : 4 909 - 4916.
  • 8ISHIDA H,ALLEN D J. Mechanical characterization of copolymers benzoxazine and epoxy[J]. Polymer, 1996, 37(20) : 4 487-4 495.
  • 9ESPINOSA M A, GALIAK M, CADIZ V. Novel phosphorilated flame retardant thermosets: Epoxy-benzoxazine-novolac systems[J]. Polymer, 2004,45 (18) : 6 103-6 109.
  • 10TAKEICHI T, GUO YONG, RIMDUSIT S. Performance improvement of polybenzoxazine by alloying with poly- imide:Effect of preparation method on the properties[J]. Polymer,2005,46(13) :4 909-4 916.

共引文献24

同被引文献27

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部