期刊文献+

蒸汽-兰炭换热与余热回收特性实验研究

Experimental Study on the Heat Transfer and Heat Recovery Characteristics of Steam and Semi-coke
下载PDF
导出
摘要 利用自行搭建的蒸汽–兰炭气固换热实验系统,研究了整个料层内兰炭与蒸汽的换热及余热回收特性,分析了颗粒平均粒径、料层厚度、蒸汽流量对兰炭余热回收量和蒸汽?增的影响规律。实验结果表明:随着换热时间的增长,料层整体平均温度以先快后慢的趋势逐渐降低,有效换热系数逐渐减小,热回收量和蒸汽的?增上升;增加料层厚度、减小兰炭颗粒的粒径、提高蒸汽流量有利于有效换热系数的增加,有效换热系数的范围在3.5~52.0 W/(m2·K)之间。此外,拟合出了粒径、料层厚度、蒸汽流量、料层整体平均温度与有效换热系数的实验关系式。 In order to study the heat transfer between semi-coke and steam,a gas-solid heat transfer experimental system was established.The effects of the particle size,material layer height,steam flow on the amount of heat recovery and energy increase were analyzed.The experimental results show that with the increase of heat transfer time,the average temperature of the whole material layer decreases slowly,the effective heat transfer coefficient decreases gradually,and the amount of heat recovery and energy recovery increase.With the increase of material layer height,the reduction of particle size and the increase of steam flow,the effective heat transfer coefficient increases in the range of 3.5~52.0 W/( m^2·K).The experimental relationship expressions between the particle size,material layer height,steam flow,average temperature of the whole material layer and effective heat transfer coefficient were fitted.
作者 宋晓轶 孙鹏 王延遐 马煜翔 SONG Xiaoyi;SUN Peng;WANG Yanxia;Ma Yuxiang(School of Transportation and Vehicle Engineering,Shandong University of Technology,Zibo 255049,China)
出处 《上海理工大学学报》 CAS CSCD 北大核心 2019年第2期123-129,共7页 Journal of University of Shanghai For Science and Technology
基金 山东省自然科学基金资助项目(ZR2014EL030,ZR2017LEE019) 国家重点研发计划重点专项(2017YFB0603504-2)
关键词 兰炭 热回收量 有效换热系数 颗粒粒径 料层厚度 蒸汽流量 semi-coke heat recovery effective heat transfer coefficient particle size material layerheight steam flow
  • 相关文献

参考文献8

二级参考文献74

  • 1Huafei Liu,Xinxin Zhang,Maolin Wu,Yanhui Feng,Yingbo Wang,Dinan Wang,Lie Xu,Wenghua Zheng.Computational and Experimental Study of Cooling Process in Coke Dry Quenching Experimental Shaft[J].Journal of Thermal Science,2002,11(2):121-127. 被引量:2
  • 2黄少鹗.用煤粉深度热处理法减轻锅炉结焦及有害物的排放[J].福建电力与电工,1995,15(1):54-55. 被引量:3
  • 3蔡九菊,王建军,陈春霞,陆钟武.钢铁企业余热资源的回收与利用[J].钢铁,2007,42(6):1-7. 被引量:153
  • 4贝尔J.多孔介质流体动力学[M].北京:中国建筑工业出版社,1983..
  • 5若尾法昭 沈静珠等(译).填充床传热与传质过程[M].北京:化字工业出版社,1986..
  • 6YUTO.K NISHIHARA.N KIMURA.M et al.ュ一クス斡式消火设备大型化研究への充填咏馕黾际酩斡τ[J].制铁研究,1982,:33-42.
  • 7TEPLITSKIL M G GORDON I Z KUDRYAVAYA N A et.al 李哲浩译.干法熄焦[M].北京 : 冶金工业出版社,1981..
  • 8胡国新 许伟 范伟杰 等.移动床颗粒层中的渗流传热数值计算[A]..中国工程物理传热传质学学术会议2000年论文集[C].西安,2000.367-369.
  • 9Caputo A C, Cardarelli G, Pelagagge P M. Analysis of Heat Recovery in Gas-Solid Moving Beds Using a Simulation Ap- proach[J]. Applied Thermal Engineering, 1996, 16(1); 89.
  • 10Pelagagge P M, Caputo A C, Cardarelli G. Optimization Cri- teria of Heat Recovery From Solid Beds[J]. Applied Thermal Engineering, 1997, 17(1): 57.

共引文献108

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部