摘要
为提高塑料疏水表面与单板亲水表面之间的界面相容性,以聚乙烯薄膜为无甲醛胶黏剂制备复合材料。分析了热处理、碱处理对界面性能影响,确定了制备此类材料的优化工艺:热处理温度140 ℃,处理时间1 h,碱浓度3%时,复合材料力学性能较佳;热处理、碱处理可以增强复合材料的界面性能。
In order to improve the interface compatibility between the two materials, a composite material was prepared using a polyethylene film as a formaldehyde-free adhesive. The effects of heat treatment and alkali treatment on the adhesion of the veneer were analyzed, and the optimal process heat treatment temperature for the preparation of this material was 140℃, the treatment time was 1 hour, and the alkali concentration was 3%. The mechanical properties of the composites were comparatively good. The heat treatment and alkali treatment can enhance the interface compatibility of the composites.
作者
韦文榜
宋伟
张凯强
张双保
WEI Wen-bang;SONG Wei;ZHANG Kai-qiang;ZHANG Shuang-bao(Beijing Key Laboratory of Wood Science and Engineering, Beijing Forestry University, Beijing 100083, China;Guangxi Eco-engineering Vocational and Technical College, Liuzhou 545004, China)
出处
《林产工业》
北大核心
2019年第6期5-9,22,共6页
China Forest Products Industry
基金
国家自然科学基金(31670571)
“十三五”国家重点研发计划“竹基纳米掺杂碳素材料制备关键技术”(2017YFD0600804)
北京市自然科学基金(6162019)
浙江省共建项目“重组竹复合材料及环保型胶粘剂的研发与应用”(浙江成竹新材料科技股份有限公司)(CZXC201410)
广西教育厅2019年度广西高校中青年教师科研基础能力提升项目“桉木单板和桉木组分制造新型复合材料的研究”(项目编号:2019k Y1423)
关键词
桉木单板
聚乙烯膜
热处理
碱处理
力学性能
Eucalyptus veneer
Polyethylene film
Heat treatment
Alkaline treatment
Mechanical properties
