摘要
在研究FANUC PICTURE强大图形显示和贴图功能的基础上,提出基于FANUC PICTURE椭圆内孔加工的人机界面开发。根据人机界面开发方法,开发出椭圆内孔加工人机界面,并与宏程序手工编程、CAD/CAM软件编程对比分析。结果表明:采用椭圆内孔加工人机界面大大缩短了编程时间,有效提高了编程效率,比宏程序手工编程效率提高40%左右,比CAD/CAM软件编程效率提高1.5倍以上。这为其他复杂形面的人机界面开发提供了参考。
On the basis of studying FANUC PICTURE powerful graphic display and mapping functions,the elliptical bore machining man-machine interface development based on FANUC PICTURE was proposed.According to the man-machine interface development method,the elliptical inner hole processing man-machine interface was developed.Comparing with macro manual programming,CAD/CAM software programming,the results show that using elliptical hole human-machine interface,the programming time is shortened greatly,its programming efficiency is about 40%higher than that of macro program,it is 1.5 times than CAD/CAM software program.It provides reference for the development of other complex surface human-machine interfaces.
作者
严瑞强
YAN Ruiqiang(Training Center of Yibin Vocational and Technical College,Yibin Sichuan 644000,China)
出处
《机床与液压》
北大核心
2019年第10期67-69,共3页
Machine Tool & Hydraulics
基金
四川省教育厅自然科学基金项目(18ZB0675)
宜宾市应用基础研究科技项目(2018SF008)
宜宾市重点科技项目(2016GY022)
宜宾职业技术学院科研项目(ybzysc16-21)
