期刊文献+

颗粒捕集器主动再生温度特性试验研究 被引量:2

Experimental Study on Temperature Characteristics of DPF Active Regeneration
下载PDF
导出
摘要 通过发动机台架试验研究氧化型催化转化器(diesel oxidation catalyst,DOC)起燃温度及颗粒捕集器(diesel particulate filter,DPF)主动再生时内部温度场分布规律。结果表明,当DOC入口温度高于240℃时,DOC可以起燃达到DPF设定的主动再生目标温度600℃;当DOC入口排气温度为240~280℃时,为减少HC二次污染,需选用较高的喷油速率,使DPF尽快达到设定目标温度。DPF主动再生过程分为3个阶段,起燃阶段DPF入口至出口温度依次快速升高;再生阶段DPF内部和出口温度高于入口温度约50℃;再生结束阶段,DPF入口至出口温度迅速降低,研究可为DPF主动再生温度的安全控制提供依据。 By engine bench test, the ignition temperature of DOC and the distribution of DPF active regeneration temperature distribution rule are studied. The test results show that when the DOC entry temperature is higher than 240 ℃, DOC can ignite and reach active regeneration DPF target temperature of 600 ℃. When the DOC entry temperature is between 240 ℃ and 280 ℃, higher injection rate should be selected to reduce secondary HC pollution, and DPF should reach the target temperature as soon as possible. DPF active regeneration process is divided into three stages, the ignition stage when the temperature of DPF from inlet to outlet rises rapidly in turn;the regeneration stage when the internal and outlet temperatures of DPF is about 50 ℃;the end of regeneration stage when the temperature from inlet to outlet of DPF decreases rapidly. The research provides a basis for safety control of DPF active regeneration temperature.
作者 刘颖帅 葛蕴珊 谭建伟 李宁 LIU Yingshuai;GE Yunshan;TAN Jianwei;LI Ning(National Lab of Auto Performance and Emission Test,Beijing Institute of Technology,Beijing 10081,China;Collaborative InnovationCenter of Electric Vehicles in Beijing, Beijing 10081, China;Weifang University of Science & Technology,Weifang261000, China)
出处 《内燃机与动力装置》 2019年第2期1-6,共6页 Internal Combustion Engine & Powerplant
基金 国家自然科学基金(51508304,41275133)
关键词 DPF 主动再生 温度场 DPF active regeneration temperature field
  • 引文网络
  • 相关文献

参考文献4

二级参考文献60

  • 1李新,资新运,姚广涛,张春润,颜伏伍.柴油机排气微粒捕集器燃烧器再生技术研究[J].内燃机学报,2008,26(6):538-542. 被引量:30
  • 2谭丕强,胡志远,楼狄明,万钢.微粒捕集器再生技术的研究动态和发展趋势[J].车用发动机,2005(5):6-9. 被引量:52
  • 3Suresh A, Yezerets A, Currier N, et al. Diesel particulate filter system-effect of critical variables on the regeneration strategy development and optimization[C]//SAE Paper, 2008-01-0329.
  • 4Toorisaka H, Minamikawa J, Narita H, et al. DPR developed for extremely low PM emissions in production commercial vehicles[C]//SAE Paper, 2004- 01-0824.
  • 5Gardner T, Yetkin A, Shotwell R, et al. Evaluation of a DPF regeneration system and DOC performance using secondary fuel injection [C] // SAE Paper, 2009-01-2884.
  • 6Nishit N, He Xiao-lai, Vikram I, et al. Real time implementation of DOC-DPF models on a production-intent ECU for controls and diagnostics of a PM emission control system[C]//SAE Paper, 2009-01- 2904.
  • 7Frohert A, Creff Y, Lepreux O, et al. Generating thermal conditions to regenerate a DPF:impact of the reductant on the performances of diesel oxidation eatalysts[C]//SAE Paper, 2009-01-1085.
  • 8Huang Yi qun, Lu Qi-long. Thermal management of a four-way catalyst system with alternative com bustions for achieving future emissions standard[C] //SAE Paper, 2007-24-0103.
  • 9Wang Dan, Liu Zhong-chang, Han Yong-qiang, et al. Experimental studies on pressure drop performance and regeneration safety of diesel particulate filter[C]//ICEICE 2011. Wuhan, china, 2011:2175- 2178.
  • 10Jeuland N, Dementhon J B. Performances and Durability of DPF(Diesel Particulate Filter) tested on a fleet of Peugeot 607 Taxis[C]. SAE paper 2004-01 -0073.

共引文献94

同被引文献26

引证文献2

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部