期刊文献+

焊缝补强型栓焊并用连接承载性能有限元分析

Finite element analysis of carrying performance of weld reinforced combined connections with bolts and welds
下载PDF
导出
摘要 焊缝补强型栓焊并用连接的模拟受力过程与以往学者的研究不同。基于焊缝补强型栓焊并用连接的相关试验数据,本文对焊缝补强型栓焊并用连接节点的受力性能进行有限元模拟,验证了有限元模型的可靠性;并基于有限元算例结果进一步分析了焊缝补强型栓焊并用连接节点的承载性能,为栓焊并用连接节点的设计提供依据。 The simulate force process of weld reinforced combined connections with bolts and welds is different from the previous scholars.In this paper,the finite element method is used to simulate the carrying performance of weld reinforced combined connections and the reliability of the finite element model is verified.Furthermore,based on the results of finite element analysis,the carrying capacity of the weld reinforced combined connections is further analyzed,which provides the basis for the design of combined connections with bolts and welds.
作者 麻建锁 王元清 李敏峰 白润山 班慧勇 蔡焕琴 Ma Jian-suo;Wang Yuan-qing;Li Min-feng;Bai Run-shan;Ban Hui-yong;Cai Huan-qin(Hebei Institute ofArchitecture and Civil Engineering,Zhangjiakou 075024,China;Key Laboratory of Civil Engineering Safety and Durability of ChinaEducation Ministry,Tsinghua University,Beijing 100084,China)
出处 《工程抗震与加固改造》 北大核心 2019年第2期109-113,108,共6页 Earthquake Resistant Engineering and Retrofitting
基金 张家口市科学技术研究与发展计划项目(1311049B)
关键词 栓焊并用 承载性能 有限元分析 焊缝补强 combined connection with bolts and welds load-carrying properties finite element analysis weld reinforcement
  • 相关文献

参考文献2

二级参考文献17

  • 1郭寓岷,贺贤娟,刘广立.焊接——高强螺栓混合连接性能与工艺研究[J].钢结构,1996,11(3):50-55. 被引量:10
  • 2王元清,杨文,石永久.加固用栓焊并用连接受力性能有限元分析[J].钢结构,2006,21(4):23-27. 被引量:13
  • 3JGJ82-2011,钢结构高强度螺栓连接技术规程[S].
  • 4GB50017-2003.钢结构设计规范[S].[S].,..
  • 5GB50017-2003.钢结构设计规范.[S].中华人民共和国建设部,..
  • 6王国周.钢结构-原理与设计[M].北京,清华大学出版社,2001.
  • 7JGJ 82 钢结构高强度螺栓连接技术规程(征求意见稿)
  • 8CECS 77-96 钢结构加固技术规范
  • 9Melior B G.Static Strength of End and T-Fillet Weld Connections.Materials and Design,1999,20(4):193-205
  • 10美国ANSYS公司北京办事处.ANSYS用户手册.北京:1998

共引文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部