摘要
采用Deform、MSC.Marc和Abaqus三款善于处理非线性问题的有限元软件对钨铜粉末轧制成形过程进行数值模拟,确定一款较为合适的模拟软件,为钨铜粉末轧制成形工艺及其参数的确定提供依据。结果表明:Abaqus软件处理非线性问题的能力较强,能够计算出粉末轧制过程中板材的相对密度、应力应变场和温度场的变化与分布。模拟结果与实验结果具有较好的一致性。
The powder rolling process of tungsten-copper was simulated with Deform,MSC.Marc and Abaqus finite element software to make sure the appropriate simulate software and provide an effective means for optimizing the technique design and setting parameters. The results show that Abaqus has the powerful ability of dealing with nonlinear problems,change and distribution of relative density,stress-strain field and temperature fields during the powder rolling process can be calculated. The simulation results are in good agreement with the experimental results.
作者
崔利群
韩胜利
李达人
胡建召
刘祖岩
CUI Liqun;HAN Shengli;LI Daren;HU Jianzhao;LIU Zuyan(National Engineering Research Center of Powder Metallurgy of Titanium & Rare Metals,Guangdong Institute of Materials and Processing,Guangzhou 510650;School of Mechanical and Electrical Engineering ( School of Standardization) ,GuangdongPolytechnic Institute,Guangzhou 510091;School of Material Science and Engineering,Harbin Institute of Technology,Harbin 150001)
出处
《材料导报》
EI
CAS
CSCD
北大核心
2019年第A01期358-361,共4页
Materials Reports
基金
广东省科学院实施创新驱动发展能力建设专项(2018GDASCX-0117)
广州市科技计划项目(ZWY201704003)
广东省公益研究与能力建设专项(2017A070701029)
广东省省级科技计划项目(2016B070701021)~~
关键词
数值模拟
粉末轧制
钨铜
numerical simulation
powder rolling
tungsten-copper
