摘要
研究电子束辐照预硫化工艺对全钢子午线轮胎过渡层胶性能的影响。结果表明,全钢子午线轮胎过渡层胶片经电子束辐照后,生胶强力和门尼粘度均有不同程度的提高,胶料的硫化速度和硫化胶的力学性能及胶片剥离力基本不变,钢丝抽出力有一定程度的下降,成品轮胎的过渡层渗胶情况得到改善。
The effect of electron beam irradiation prevulcanization process on the properties of transition compound for all-steel radial tire was studied. The results showed that after electron beam irradiation,the strength and Mooney viscosity of the compound increased,curing speed of the compound,mechanical properties of the vulcanizates and the film peeling force changed little,steel pull-out force was reduced to a certain extent,and the rubber penetration into the transition layer of the finished tire was reduced.
作者
刘永强
姜斌
慈婷楠
许建欣
LIU Yongqiang;JIANG Bin;CI Tingnan;XU Jianxin(Prinxchengshan(Shandong)Tyre Co. ,Ltd,Rongcheng 264300,China)
出处
《轮胎工业》
CAS
2019年第6期362-364,共3页
Tire Industry
关键词
电子束辐照
预硫化
全钢子午线轮胎
过渡层
electron beam irradiation
prevulcanization
all-steel radial tire
transition layer