摘要
One of the important phases of designing a craft is stability analysis and optimization of the drag force in cruise speed. In this research the longitudinal and lateral stability of a planing hull craft (DTMB 62 model 4667-1) is investigated with some semi-empirical formulae and the effects of some important design parameters are investigated on the limit of stability region. Also on the basis of these empirical formulations and by using a genetic algorithm the drag force is optimized in each constant cruise speed with the stability criteria limits at a constant beam or projected area. Aspect ratio, the longitudinal position of the gravity center and deadrise angle are the optimization parameters. The results show that the aspect ratio and the longitudinal position of the gravity center are two important parameters in optimizing the drag force and for this planing vessel the drag force can be reduced by 22%.
One of the important phases of designing a craft is stability analysis and optimization of the drag force in cruise speed. In this research the longitudinal and lateral stability of a planing hull craft(DTMB 62 model 4667-1) is investigated with some semi-empirical formulae and the effects of some important design parameters are investigated on the limit of stability region. Also on the basis of these empirical formulations and by using a genetic algorithm the drag force is optimized in each constant cruise speed with the stability criteria limits at a constant beam or projected area. Aspect ratio, the longitudinal position of the gravity center and deadrise angle are the optimization parameters.The results show that the aspect ratio and the longitudinal position of the gravity center are two important parameters in optimizing the drag force and for this planing vessel the drag force can be reduced by 22%.
