机电安装工程成本控制难点分析及对策论述

Analysis of Difficulties in Cost Control of Mechanical and Electrical installation Engineering and Discussion on Countermeasures

机电安装工程作为建筑工程实施中比较基础的一部分,其施工过程中的合理成本管控,直接关系到整体工程安装成本计划是否能完成。为此,必须对机电安装的成本控制点进行合理的分析。机电安装成本的控制,就是在确保机电安装质量的基础上对工程实施中涉及到的人力、物力等成本投入进行综合规划,优化安装施工成本的一个过程。机电安装工程在建筑工程实施中是贯穿整个建造过程的,其施工质量直接关系建筑工程的最终成效。相应的,其安装成本控制合理性,也直接关乎整体工程的经济效益产出。随着新时代下科技的不断进步,机电安装也应该紧跟经济性及环保性要求,以低投入来实现高产出的总体建设旨意。因此结合机电安装的基本内容,对机电安装中的成本控制难点进行了总结。同时结合这些难点对如何优化机电安装成本控制提出了几点建议,以供参考。

As a part of the comparative foundation in the implementation of construction engineering, the reasonable cost control in the construction process of mechatronics installation project is directly related to whether the installation cost plan of the whole project can be completed. Therefore, the cost control points of mechanical and electrical installation must be analyzed reasonably. The control of mechanical and electrical installation cost is a process of comprehensive planning of manpower, material and other costs involved in the implementation of the project on the basis of ensuring the quality of mechanical and electrical installation, and optimizing the installation and construction cost. Mechanical and electrical installation engineering runs through the whole construction process in the implementation of construction engineering, and its construction quality is directly related to the final effect of construction engineering. Corresponding The rationality of its installation cost control is also directly related to the economic benefits of the overall project. With the continuous progress of science and technology in the new era, mechanical and electrical installation should also keep up with the requirements of economy and environmental protection, and achieve the overall construction purport of high output with low input. Therefore, combined with the basic contents of electromechanical installation, the difficulties of cost control in mechatronics installation are summarized. At the same time, combined with these difficulties, some suggestions on how to optimize the cost control of mechanical and electrical installation are put forward for reference.