期刊文献+

基于水驱开发全过程的新型水驱特征曲线 被引量:11

A New Water-Flooding Characteristic Curve Based on the Whole Water-Flooding Process
下载PDF
导出
摘要 注水开发油藏高含水期,油水相对渗透率之比与含水饱和度不再为线性关系,导致传统的水驱特征曲线不再适用。针对上述问题,基于Willhite相对渗透率曲线表征公式,提出了适应于水驱开发全过程的油水相对渗透率比值与含水饱和度的关系式,结合油藏工程方法,得到新型水驱特征曲线。将新型水驱特征曲线应用于江苏油田高6断块,综合含水率为92%时,新型水驱特征曲线的预测误差为1.24%,比常规乙型水驱特征曲线的拟合效果更好,预测误差更小。该研究成果对水驱油藏高含水期开发调整具有重要意义。 The oil-water relative permeability ratio no longer linearly correlates with water saturation in the high watercut stage of waterflooding development,which leads to certain limitations to the traditional waterflooding characteristic curve application. According to the Willhite relative permeability equation,a correlation between the oilwater relative permeability ratio and water saturation was proposed for the whole waterflooding process. A new waterflooding characteristic curve was gained by combining with the conventional reservoir engineering method. This new waterflooding characteristic curve was applied to the Faultblock Gao6 in Jiangsu Oilfield. The relative forecast error is only 1. 24% when the comprehensive watercut is 92%,which is more effective and accuracy than that of traditional B waterflooding characteristic curve. This research could provide certain significance for the development and adjustment of waterflooding reservoir in high watercut stage.
作者 李立峰 滕世婷 冯绪波 崔传智 冯安琦 Li Lifeng;Teng Shiting;Feng Xubo;Cui Chuanzhi;Feng Anqi(Sinopec Jiangsu Oilfield Company, Huaian, Jiangsu 211600, China;China University of Petroleum ( East China) , Qingdao, Shandong 266580, China)
出处 《特种油气藏》 CAS CSCD 北大核心 2019年第3期85-88,共4页 Special Oil & Gas Reservoirs
基金 国家科技重大专项“平面分区均衡动用主控因素及优化调控方法研究”(2016ZX05011002-003) 中国石油化工股份有限公司科技部攻关项目“特高含水期剩余油动用条件及流场调控技术优化研究”(P16100)
关键词 高含水期 水驱开发 相对渗透率曲线 水驱特征曲线 江苏油田 high watercut stage waterflooding development relative permeability curve waterflooding character istic curve Jiangsu Oilfield
  • 相关文献

参考文献23

二级参考文献193

共引文献441

同被引文献173

引证文献11

二级引证文献58

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部