摘要
传统荧光分子由于具有聚集诱导猝灭效应,其在高浓度或固态状态下荧光消失,限制了其实际应用。为克服这一缺陷,研究合成基于丙烯酸树脂的离子聚合物并将罗丹明B荧光分子原位掺杂于聚合物体系中。利用聚合物链段上的离子与荧光分子之间的电荷作用抑制荧光分子在体系中的聚集,设计合成了不同罗丹明B掺杂量和不同玻璃化温度下的荧光树脂,探讨了罗丹明B掺杂量、玻璃化温度、聚合物质量百分浓度、不同溶剂以及环境温度对荧光树脂性能的影响。结果表明,通过电荷的吸引作用,利用聚合物链段的吸附和阻隔,可促进荧光分子的有效分散,从而实现固化涂膜的有效发光。
Due to the aggregation induced quenching effect, the fluorescence of traditional organic fluorescent molecules often quenches at high concentration or solid state, which limits their practical applications. In order to conquer the deficiency, a number of acrylic resinbased ionic polymers were synthesized with in-situ incorporation of Rhodamine B in polymer system. Owing to the charge attraction between the ions in polymer chains and Rhodamine B , the aggregation trend of fluorescent molecules were inhibited effectively. Different fluorescent polymer resins with varying amount of Rhodamine B and glass transitions were synthesized. The effects of different factors, such as the amount of Rhodamine B, the glass transition temperature, the concentration of ionic polymer solution, the different solvents, and the surrounding temperature, on the fluorescent behavior of the prepared products were discussed. The results showed that due to the charge attraction and the isolation and absorption of polymer chains, the fluorescent molecules could disperse in the system homogeneously and emit strong fluorescence effectively.
作者
解义晓
王勇
王林
王军
吉富华
徐泽孝
陈相楠
汪中伟
李为立
Xie Yixiao;Wang Yong;Wang Lin;Wang Jun;Ji Fuhua;Xu Zexiao;Chen Xiangnan;Wang Zhongwei;Li Weili(School of Material Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang, Jiangsu 212003, China;Suzhou Jiren Hi-Tech Material Co., Ltd, Suzhou, Jiangsu 215143, China)
出处
《涂料工业》
CAS
CSCD
北大核心
2019年第7期8-15,共8页
Paint & Coatings Industry
基金
国家自然基金面上项目(项目编号:51673088)
江苏科技大学2018年度本科创新计划
关键词
罗丹明B
离子聚合物
聚集诱导猝灭
荧光
响应性
Rhodamine B
ionic polymer
aggregation induced quenching
fluorescence
responsiveness