摘要
PbO2/Co3O4 composites were prepared on a Ti substrate by means of a composite electrodeposition method in Pb2+ plating solution containing dissolved nano-Co3O4 particles. X-ray diffraction（XRD）, scanning electron microscopy（SEM）, energy dispersive spectrometry（EDS） and transmission electron microscopy（TEM） were used to characterize the chemical composition and morphology of the PbO2/Co3O4 composites. The electrochemical and capacitance performance of the composites were investigated by cyclic voltammetry（CV）, charge-discharge tests and electrochemical impedance（EIS）. The results indicate that the composites comprise rutile phase Co3O4 and β-PbO2. In addition, the surface of the composite electrode is rough and porous. The PbO2/Co3O4 composites exhibit a high specific capacitance up to 215 F/g, which is ten times higher than that of the pure-PbO2 and two times higher than that of the pure-Co3O4 in 1 mol/L NaOH electrolytes.
基金
Supported by the National Natural Science Foundation of China(No.51502117,No.21671084)
Key Research&Development Plan of Zhenjiang City(No.SH2017051)
Foundation from Marine Equipment and Technology Institute for Jiangsu University of Science and Technology(No.HZ20170015)
Six Talent Peaks Project in Jiangsu Province(No.2014-XCL-008)
