摘要
Fabrication of flexible transparent electrodes(FTEs) is one of the core technologies in the field of flexible electronics. Among multiple choices of FTEs, poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonic acid)(PEDOT:PSS) has shown its promising application in roll-to-roll manufacturing. A simple yet effective method for substantially boosting the conductivity of these conducting polymer films without causing large-domain aggregations is by adding ethylene glycol(EG) as dopant. Herein, we investigated in detail the effects of the secondary solvent of ethylene glycol(EG) on the optical and electrical characteristics of PEDOT:PSS films. The modified PEDOT:PSS FTEs were deposited using drop-coating techniques as it had greater compatibility for large-area samples than the conventional spin-coating method did. The 6% EG-doped PEDOT:PSS FTE via drop-coating method achieved a high figure of merit(FoM) value of 47.24 and the devices fabricated using the optimal PEDOT:PSS FTE yielded a high power conversion efficiency(PCE) of 8.89%, mostly attributed to the modified PEDOT:PSS films that had excellent optical and electrical characteristics with low surface roughness. These results suggested that EG-doping could effectively boost the conductivity of PEDOT:PSS films and that the modified PEDOT:PSS FTE is suitable for roll-to-roll manufacturing in the future.
Fabrication of flexible transparent electrodes(FTEs) is one of the core technologies in the field of flexible electronics. Among multiple choices of FTEs, poly(3,4-ethylenedioxythiophene):poly(styrene-sulfonic acid)(PEDOT:PSS) has shown its promising application in roll-to-roll manufacturing. A simple yet effective method for substantially boosting the conductivity of these conducting polymer films without causing large-domain aggregations is by adding ethylene glycol(EG) as dopant. Herein, we investigated in detail the effects of the secondary solvent of ethylene glycol(EG) on the optical and electrical characteristics of PEDOT:PSS films. The modified PEDOT:PSS FTEs were deposited using drop-coating techniques as it had greater compatibility for large-area samples than the conventional spin-coating method did. The 6% EG-doped PEDOT:PSS FTE via drop-coating method achieved a high figure of merit(FoM) value of 47.24 and the devices fabricated using the optimal PEDOT:PSS FTE yielded a high power conversion efficiency(PCE) of 8.89%, mostly attributed to the modified PEDOT:PSS films that had excellent optical and electrical characteristics with low surface roughness. These results suggested that EG-doping could effectively boost the conductivity of PEDOT:PSS films and that the modified PEDOT:PSS FTE is suitable for roll-to-roll manufacturing in the future.
基金
financially supported by the National Key R&D Program of China (No. 2017YFE0106000)
the National Natural Science Foundation of China (Nos. 21574144, 51773212, 61705240, and 21674123)
Zhejiang Provincial Natural Science Foundation of China (No. LR16B040002)
Ningbo Municipal Science and Technology Innovative Research Team (Nos. 2015B11002 and 2016B10005)
CAS Interdisciplinary Innovation Team
CAS Key Project of Frontier Science Research (No. QYZDB-SSW-SYS030)
CAS Key Project of International Cooperation (No. 174433KYSB20160065)
