期刊文献+

浅析大口径薄壁钢管的设计注意事项

Analysis on Matters Needing Attention in Design of Large Diameter Thin-wall Steel Pipe
下载PDF
导出
摘要 在工程项目建设中,大口径薄壁钢管的应用较为广泛,工程公司需要根据项目的不同要求,合理进行大口径薄壁钢管系统的设计及选用。基于此,文章将大口径薄壁钢管的设计作为研究对象,设计注意事项和实现要点进行分析,从而设计出合理的大口径薄壁管道系统,提高工程质量,合理降低工程造价,建设优质工程。 In the construction of engineering project, the large diameter thin-wall steel pipe is widely used, and the engineering company needs to reasonably design and select the large-diameter thin-wall steel pipe system according to the different requirements of the project. Based on this, this paper takes the design of large diameter thin-wall steel pipe as the research object, analyzes the matters needing attention in the design and the key points of realization, so as to design a reasonable large-diameter thin-wall pipeline system, improve the engineering quality, reasonably reduce the project cost and construct the high-quality project.
作者 耿金伟 GENG Jinwei(PetroChina Jilin Chemical Engineering Co.,Ltd.,Jilin Jilin,132002 China)
出处 《工程建设(维泽科技)》 2019年第7期53-54,共2页 Engineering Construction
关键词 大口径 薄壁 钢管 Large caliber Thin wall Steel pipe
  • 相关文献

参考文献1

二级参考文献12

  • 1方立.用CAESARⅡ软件进行管道应力计算的几个问题探讨[J].化工设备与管道,2004,41(6):40-43. 被引量:29
  • 2GB/T20801-2006.压力管道规范工业管道[S]
  • 3GB150-2011,压力容器[S].北京,中国国家标准化管理委员会,2011.
  • 4JB/T4730.1-6-2005,承压设备无损检测[S].
  • 5ASME B31.3-2012,Process Piping[S].
  • 6ASME Boiler and Pressure Vessel Code SECTION Ⅷ-1-2013,Rules for Construction of Pressure Vessels[S].
  • 7ASTM A358/A358M-2012,Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications[S].
  • 8HG 20537.4-1992,化工装置用奥氏体不锈钢大口径焊接钢管技术要求[S].
  • 9ASME B16.9-2012,Factory-Made Wrought Buttwelding Fittings[S].
  • 10应道宴.GB/T 20801-2006《压力管道规范工业管道》实施指南[M].北京:新华出版社,2008:146-164.

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部