期刊文献+

导爆管等效缩比模型过载特性研究

Study on Overload Characteristics of Equivalent Shrinkage Model of Detonator
下载PDF
导出
摘要 为了研究导爆管在战斗部侵彻靶板时所承受的过载,需要将导爆管安装在战斗部内,连同战斗部一起侵彻靶板。利用侵彻试验的方法能够较为准确地获得导爆管的冲击过载。通过仿真得到缩比后的导爆管与原型尺寸在产生相同的变形程度时受到的过载,获得导爆管在产生相同的变形程度时其承受过载与其尺寸大小的关系。 In order to study the overload of a nonel tube in the warhead penetrating the target,a nonel tube should be installed in the warhead and penetrated into the target with the warhead. The impact overload of the nonel tube can be accurately obtained by means of penetration test. Through the simulation,the overloading of the detonator and the prototype size in the same deformation degree is obtained after the contraction,and the relationship between the overloading and the size of the detonator is obtained when the same deformation degree is produced.
作者 吴昊 李明文 惠江海 WU Hao;LI Mingwen;HUI Jianghai(Xi'an Military Representative Bureau of Armament Department,Xi'an 710000;Representative Office of Air Force in Baotou,Baotou 014033;Shijiazhuang Campus,Army Engineering University,Shijiazhuang 050003)
出处 《舰船电子工程》 2019年第7期92-95,99,共5页 Ship Electronic Engineering
关键词 导爆管 缩比模型 过载特性 detonator shrinkage model overload characteristics
  • 相关文献

参考文献12

二级参考文献86

共引文献75

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部