期刊文献+

探究切削液对金属加工的影响 被引量:3

Explore the Influence of Cutting Fluid on Metal Processing
下载PDF
导出
摘要 在金属工件切削加工当中,采用切削液能够有效保证切削精度、减少加工痕迹;但是切削液使用不当,也会对金属加工造成负面影响。基于此,对切削液进行讨论,分析切削液对金属加工的影响,并提出金属加工中切削液使用注意事项。 In the cutting process of metal workpieces,the cutting fluid can effectively ensure the cutting accuracy and reduce the processing marks;however, improper use of the cutting fluid will also have a negative impact on metal processing. Based on this, the cutting fluid is discussed, the influence of cutting fluid on metal processing is analyzed, and the precautions for the use of cutting fluid in metal processing are proposed.
作者 余晶 YU Jing(Wuhan Branch of SAIC General Motors Co., Ltd., Wuhan430200)
出处 《现代制造技术与装备》 2019年第6期174-175,共2页 Modern Manufacturing Technology and Equipment
关键词 切削液 金属加工 注意事项 cutting fluid metal processing precautions
  • 相关文献

参考文献2

二级参考文献15

  • 1陈蓉,刘莹.切削液的作用机理介绍[J].哈尔滨轴承,2007,28(3):47-48. 被引量:1
  • 2Sujova E. Contamination of the working air via metalworking flu- ids aerosols[ J]. Engineering Review,2012,32( 1 ) : 9 - 15.
  • 3Sokolovie D S, Hoflinger W, Secerov Sokolovic R M, et al. Experimental study of mist generated from metalworking fluids emulsions [ J ]. Journal of Aerosol Science, 2013,61 : 70 - 80.
  • 4Gunter K L, Sutherland J W. An experimental investigation into the effect of process conditions on the mass concentration of cut- ting fluid mist in turning [ J ]. Journal of Cleaner Production, 1999,7(5) : 341 -350.
  • 5Sun J, Ju C, Yue Y, et al. Character and behavior of mist genera- ted by application of cutting fluid to a rotating cylindrical work- piece : Part 2 : experimental validation [ J ]. Journal of Manufac- turing Science and Engineering ,2004,126 ( 3 ) : 426 - 434.
  • 6Dasch J M, D'arcy J B, Kinare S S, et al. Mist generation from high-speed grinding with straight oils [ J ]. Tribology Transac- tions,2008,51 (3) : 381 -388.
  • 7Broniarz-Press L, Oehowiak M, Rozanski J, et al. The atomization of water-oil emulsions [ J ]. Experimental Thermal and Fluid Science,2009,33 (6) : 955 - 962.
  • 8Yue Y, Sun J, Gunter K L, et al. Character and behavior of mist generated by application of cutting fluid to a rotating cylindrical workpiece : Part 1 : model development [ J ]. Journal of Manufac- turing Science and Engineering,2004,126(4) : 417 -425.
  • 9Qian L, Lin J, Xiong H, et al. Theoretical investigation of the in- fluence of liquid physical properties on effervescent atomization performance [ J ]. Journal of Fluids Engineering,2011,133 (10) : 101205.1 - 11.
  • 10Kang B S,Shen Y B, Poulikakos D. Holography experiments in the breakup region of a liquid sheet formed by two impinging jets [ J ]. Atomization and Sprays, 1995,5 (4/5) : 387 - 402.

共引文献5

同被引文献23

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部