注射剂用胶塞的清洗灭菌工艺

Cleaning and Sterilization Technology of Rubber Plug for Injection

为避免注射剂用胶塞对药液造成污染,影响注射剂使用效果,在其应用前,需采取科学的清洗灭菌工艺。具体来说,应用专门的胶塞清洗机设备,按照特定清洗灭菌工艺,对注射剂用胶塞进行预清洗、进料、粗洗、精洗、升温灭菌、真空置换干燥以及冷却等操作,使其达到生产应用所需质量要求。采用清洗灭菌工艺处理后的注射剂用胶塞达到相应的质量要求,由此可知,采用科学合理的清洗灭菌工艺处理注射剂用胶塞,能够使注射剂用胶塞各项指标达到注射剂生产应用标准,有效保证注射剂质量。

In order to avoid contamination of the drug solution by the rubber stopper for injection, the effect of the injection is affected, and a scientific cleaning and sterilization process is required before application. Specifically, the special rubber stopper cleaning device is applied, and the injection plug is pre-cleaned, fed, roughly washed, refined, heated, vacuumdisplaced, dried, and cooled according to a specific cleaning and sterilization process. Make it meet the quality requirements for production applications. The rubber plug used in the cleaning and sterilization process has reached the corresponding quality requirements. It can be seen that the scientific and reasonable cleaning and sterilization process can be used to treat the injection rubber plug, which can make the injection rubber plug index meet the injection production application standard., to ensure the quality of the injection.