摘要
利用HYSYS软件对连续重整反应进行数据标定,得到较为准确的反应模型,测算值与实际值相差1%;对不同反应温度生成油各类参数进行测算,C5+液收随着温度升高下降,反应温度上升5℃,液收下降约1%;辛烷值上升1个单位,反应温度需提高4~5℃,反应温度上升5℃,总芳收率上升0.7%。对重整系统进行全流程模拟,模拟结果与实际一致,此模型可用于不同工况下的模拟测算。
Using HYSYS software to calibrate the data of continuous reforming reaction, we can obtain a relatively accurate reaction model, The difference between the calculated value and the actual value was less than 1%.Then we can measure various parameters of produced oil at different reaction temperature. The liquid yield of C5+ decreases with the increase of temperature. When the reaction temperature rises by 5℃, the liquid yield decreases by about 1%. When the octane number increases by 1 unit, the reaction temperature needs to be increased by 4-5℃. The yield of total aromatics increased by 0.7% when the reaction temperature increased by 5℃. The simulation results of whole process simulation of the reforming system are consistent with the actual situation. The model can be used to simulate the calculation under different conditions.
作者
周庆舟
刘春柳
秦卫龙
ZHOU Qing-zhou;LIU Chun-liu;QIN Wei-long(Qingdao Refining & Chemical Co. Ltd,SINOPEC,Qingdao 266500)
出处
《天津化工》
CAS
2019年第4期31-34,共4页
Tianjin Chemical Industry