期刊文献+

GH4169合金的反常应力松弛行为 被引量:1

Abnormal Stress Relaxation Behavior of GH4169 Alloy
下载PDF
导出
摘要 对GH4169合金在500,620,720℃下进行了应力松弛、蠕变和热膨胀试验,结合显微组织观察研究了合金的应力松弛行为。结果表明:在500℃和620℃应力松弛试验过程中,GH4169合金的应力随时间的延长反常增大,在蠕变过程中表现为负蠕变应变,而在720℃下合金的应力松弛和蠕变行为均正常;在不同温度热膨胀试验过程中,GH4169合金均出现了收缩现象;γ″相析出使得γ基体的晶格常数减小,是导致GH4169合金在620℃下应力反常增大的主要原因。 Stress relaxation,creep and thermal expansion tests at 500,620,720 ℃ were conducted on GH4169alloy,and then the stress relaxation behavior was studied by combination of microstructure observation. The results show that the stresses in the GH4169alloy increased abnormalloy with increasing time during stress relaxation tests at 500 ℃ and 620 ℃,and showed negative creep strains during creep.However,the stress relaxation behavior and creep behavior of the alloy were normal at 720℃.Shrinkage was observed in the GH4169 alloy during thermal expansion tests at different temperatures.The reduction of lattice parameter ofγmatrix, which was caused by the precipitation ofγ″phase,was the main reason for the abnormal increase of stresses in the GH4169alloy at 620℃.
作者 迟海 郭霞 刘伟丽 高峡 贺俊智 秦海龙 王凯 毕中南 CHI Hai;GUO Xia;LIU Weili;GAO Xia;HE Junzhi;QIN Hailong;WANG Kai;BI Zhongnan(Beijing Center for Physical and Chemical Analysis,Beijing 100094,China;Beijing Key Laboratory of Organic Materials Testing Technology & Quality Evaluation,Beijing 100094,China;Beijing Academy of Science and Technology Key Laboratory of Analysis and Testing Technology,Beijing 100089,China;High Temperature Materials Research Division,Central Iron &Steel Research Institute,Beijing 100081,China)
出处 《机械工程材料》 CAS CSCD 北大核心 2019年第7期64-68,共5页 Materials For Mechanical Engineering
基金 北京市市级财政项目(PXM2018_178305_000009)
关键词 GH4169合金 时效 应力松弛 蠕变 GH4169alloy aging stress relaxation creep
  • 相关文献

参考文献3

二级参考文献35

  • 1黄晓婧,王俊彪,张贤杰.铝合金时效蠕变与时效应力松弛关系研究[J].航空制造技术,2011,0(11):99-101. 被引量:12
  • 2魏洪亮,杨晓光,于慧臣.GH4169合金高温力学行为本构建模及参数识别[J].材料工程,2005,33(4):42-45. 被引量:9
  • 3杨玉荣,梁学锋,蔡伯成,黄福祥.GH4169合金涡轮盘的高温低循环疲劳性能[J].四川冶金,1996,18(3):41-43. 被引量:4
  • 4李建明,赵乃勤,李群英,杜希文,师春生,魏芳荣.65Mn弹簧钢在弯曲应力下的松弛行为[J].金属热处理,2007,32(5):90-94. 被引量:13
  • 5Yin Feng-shi, Jung Woo-sang, Chung Soon-hyo. Microstructure and creep rupture characterisitics of an ultra-low carbon ferritic/martensitic heat-resistant steel [J]. Scripta Materialia, 2007,57(6) : 469-472.
  • 6Abe F,Taneike M, Sawada K. Alloy design of creep resistant 9Cr steel using a dispersion of nano-sized carbonitrides [J]. International Journal of Pressure Vessels and Piping, 2007,84(1-2) : 3 - 12.
  • 7Francois Louchet. A model of negative creep in nickel-based superalloys [J]. Scripta Metallurgicaet Materialia,1995,33 (6):913-918.
  • 8Ren D G. Atom prob and field ion microscope investigation of the negative creep mechanism in Nickel-base superalloy [J]. Journal of Materials Processing Technology, 1998,73 (1-3):74-77.
  • 9Holman M C. Autoclave age forming large aluminium aircraft panels [J]. J. Mech. Work. Technol, 1989. (20) :477-488.
  • 10Denise M Hambrick. Age forming technology expanded in aotoclave[C]. SAETransaction, 1985 : 94-97.

共引文献16

同被引文献15

引证文献1

二级引证文献1

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部