衣柜换装结构设计研究

Research on the Replacement Structural Design of Wardrobe Door

本研究主要针对衣柜换装结构设计。通过调研和借鉴,最终选取了4种相关的可行方案,从换装和固定的方式两方面细化了设计想法。主要设计成果如下:1)整板翻面式换装;2)拼板翻面式换装;3)立柱旋转式换装;4)折扇式换装。前两种是基于木框嵌板结构,围绕整板和拼板两种形式的变换所设计的可拆装结构;第三种是利用圆棒榫作为中心轴而设计的旋转变换结构;第四种是基于折扇的形式,在柜门上实现了伸缩改变的变换结构。

Focusing on the replacement structural design of wardrobe door,four feasible solutions were finally selected and then refined from two aspects of changing and fixing through investigation and reference. The main design results are as follows:(1)Full-board flip mode;(2)Jointed board flip mode;(3)Column rotation mode;(4)Folding fan mode. The first two are knock-down structures based on woodframe panel structure,which are designed around the transformation of whole board and splitting board.The third one is the rotational transformation structure designed by using the circular bar tenon as the central axis. The fourth one is based on the folding fan structure,which realizes the transformation structure of expansion and change on the cabinet door.