基于单片机的多路温度采集器设计

Design of multi-channel temperature collector based on single chip microcomputer

伴随着时代的快速发展,智能将会成为今后的主流方向,按照设定好的思路,在特定的环境里自主工作,不需要人为的操控.在本次研究中,以STC89C51单片机作为核心控制器,用DS18B20温度传感器检测温度,当采集到的数值高于或低于预先设定值时,报警模块进行反馈工作;待检测的数值处理后,显示时数据可以读取到十分位.

With the rapid development of the times,intelligence could become the mainstream direction in the future.It will work autonomously in a specific environment according to a set idea and no manual operation is required.In the research,the paper uses STC89C51 microcontroller as the core controller and DS18B20 temperature sensor to detect the temperature.When the collected value is higher or lower than the original set value,the alarm module performs feedback work.After the detected numerical value is processed,the data can be read to ten bits during display.