摘要
针对贵州安龙某金矿山矿样特点进行了硫代硫酸盐法浸金工艺研究,考察了硫代硫酸钠浸金体系中各个因素对浸金效果的影响,结果显示,在硫代硫酸钠浓度为0.7 mol/L,氨浓度1.2mol/L,pH值为10,浸出时间为5h,浸出温度为45℃的此条件下,金浸出率达到90%以上.
According to the characteristics of a gold mine in Anlong, Guizhou Province, non-cyanide leaching process was studied. The effects of various factors on gold leaching efficiency in thiosulfate leaching system were investigated. The results showed that when thiosulfate concentration is 0.7 mol/L, ammonia concentration is 1.2 mol/L, pH value is 10, leaching time is 5h and leaching temperature is 45℃, gold leaching rate can reach more than 90%.
作者
韩俊尧
彭伟
HAN Jun-yao;PENG Wei(No.117 Geological Brigade of Guizhou Geological and Mineral Resources Bureau,Guiyang 550018,China;Guizhou Institute of Metallurgical and Chemical Engineering,Guiyang 550016,China)
出处
《价值工程》
2019年第24期272-273,共2页
Value Engineering
关键词
金
硫代硫酸钠
浸出率
gold
thiosulfate
leaching rate