期刊文献+

Nonlinear vibration analysis of a circular composite plate harvester via harmonic balance 被引量:4

下载PDF
导出
摘要 Alumped parameter transversevibration model of a composite plate harvester is analyzed via harmonic balance approaches. The harvester is mainly composed of a piezoelectriccircular composite clamped by two steel rings and a proof mass on the plate.The lumped parameter model is a 1.5 degree-of-freedom strongly nonlinear system with a higher order polynomial stiffness. Aharmonic balance approach is developed to analyze the system, and the resulting algebraic equations are numerically solved by adopting an arc-length continuation technique. Anincremental harmonic balance approach is also developedfor the lumped parameter model. The two approaches yieldthe same results.The amplitude-frequency responses produced by the harmonic balance approach are validated by the numericalintegrations and the experimental data. The investigation reveals that there coexist hardening and softening characteristics in the amplitude-frequency response curves under sufficiently large excitations. The harvester with thecoexistenceof hardening and softening nonlinearitiescan outperform not only linear energy harvesters but also typical hardening nonlinear energy harvesters.
出处 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2019年第4期912-925,共14页 力学学报(英文版)
基金 This work was supported by the National Natural Science Foundation of China (Grants 51575334 and 11802170) the State Key Program of National Natural Science Foundation of China (Grant 11232009) the Key Research Projects of Shanghai Science and Technology Commission (Grant 18010500100) the Innovation Program of Shanghai Municipal Education Commission (Grant 2017-01-07-00-09-E00019).
  • 相关文献

参考文献5

二级参考文献68

  • 1Roundy, S., Wright, RK., Rabaey, J.: A study of low level vi- brations as a power source for wireless sensor nodes. Computer Communications 26(11), 1131-1144 (2003).
  • 2; Lu, F., Lee, H. P., Lim, S.E: Modeling and analysis of micro piezoelectric power generators for micro-electromechanical- systems applications. Smart Materials and Structures 13(1), 57-63 (2004).
  • 3Sodano, H.A., Lloyd, J., Inman, D.J.: An experimental com- parison between several active composite actuators for power generation. Smart Materials and Structures 15(5), 1211-1216 (2006).
  • 4Erturk, A., Inman, D.J.: A distributed parameter electrome- chanical model for cantilevered piezoelectric energy harvesters. Journal of Vibration and Acoustics 130(4), 041002 (2008).
  • 5Anton, S.R., Sodano, H.A.: A review of power harvesting us- ing piezoelectric materials (2003-2006). Smart Materials and Structures 16(3), R1-R21 (2007).
  • 6Goldschmidtboeing, E, Woias, P.: Characterization of differ- ent beam shapes for piezoelectric energy harvesting. Journal of Micromechanics and Microengineering 18(10), 104013 (2008).
  • 7Mo, C., Kim, S., Clark, W.W.: Theoretical analysis of en- ergy harvesting performance for unimorph piezoelectric ben- ders with interdigitated electrodes. Smart Materials and Struc- tures 18(5), 055017 (2009).
  • 8Lee, S., Youn, B.D., Jung, B.C.: Robust segment-type energy harvester and its application to a wireless sensor. Smart Mate- rials and Structures 18(9), 095021 (2009).
  • 9Silva, E.C.N., Kikuchi, N.: Design of piezocomposite materi- als and piezoelectric transducers using topology optimization - part III. Archives of Computational Methods in Engineering 6(4), 305-329 (1999).
  • 10Buehler, M.J., Bettig, B., Parker, G.G.: Topology optimization of smart structures using a homogenization approach. Journal of Intelligent Material Systems and Structure 15(8), 655-667 (2004).

共引文献35

同被引文献11

引证文献4

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部