基于金属液滴水平重叠沉积工艺对表面形貌和内部质量优化研究（英文）

Process Optimization of Surface Morphology and Internal Quality Based on Metal Droplets Horizontal Lapped Deposition

铝熔滴在铝基板上沉积、凝固过程中,研究了不同工艺参数下的对成形表面形貌和内部质量的影响规律。通过对单一金属液滴沉积行为研究,建立了横向搭接沉积数值模型,并对1,2,3,4个熔融液滴重叠形态的进化和温度变化过程进行分析和实验验证。实验表明:数值模拟与实验结果有良好的一致性,从而得到了最优参数。该研究对实现金属微液滴重叠沉积生产的有效过程控制至关重要,为液滴水平重叠沉积复杂金属提供了技术支持和参考。

During horizontal lapped deposition and solidification of an aluminum molten droplet onto an aluminum substrate, the effects of different process parameters on the surface morphology and interior quality of the specimens were studied. By researching the single metal droplet deposition behavior, a numerical model of horizontal lapped deposition was established, and the evolution of morphology and temperature of one, two, three and four molten droplets horizontal lapped deposition impacting a substrate surface at different time was analyzed and multiple droplets successively deposition experiments under the different simulation parameters were carried out. The results indicate that the comparison between numerical simulations and experiments shows a good agreement. The optimal parameters were obtained. This investigation is essential to implement effective process control in metal micro-droplet deposition manufacture and it provides technical support and reference for molten droplets horizontal lapped deposition process of the complex metal parts.