摘要
为了增强常规A/O工艺脱氮及抗冲击负荷性能、减少剩余污泥产生,在缺氧池及好氧池内加入玄武岩纤维(BF)填料,研究BF填料强化A/O工艺脱氮效率、抗冲击负荷性能及污泥减量效果。结果表明:强化A/O工艺对生活污水中COD、NH^+4-N和TN具有较高的去除效果,其去除率分别可达95%、98%和86.3%。对于高负荷有机废水,与常规A/O工艺相比,强化A/O工艺出水效果稳定,抗冲击负荷性能增强,NH^+4-N和TN的平均去除率分别提高了19%和20.9%。污泥产率为0.19kg/kg(以COD计),较常规A/O工艺降低了40.6%。
In order to enhance the denitrification and impact load resistance of the conventional A/O process and reduce the residual sludge production, basalt fiber (BF) packing materials were used in the anoxic tank and the aerobic tank.The denitrification efficiency, impact load resistance and sludge reduction effect of the enhanced A/O process were studied.The results showed that the BF packing materials enhanced A/O process had a high removal efficiency on COD, NH + 4-N and TN in domestic sewage, and the removal rates reached 95%, 98% and 86.3%, respectively.For high-load organic wastewater, compared with the conventional A/O process, the enhanced A/O process had more stable effluent quality and the enhanced impact load resistance.The average removal rates of NH + 4-N and TN were increased by 19%, 20.9%, respectively.The sludge yield was 0.19 kg/kg, which was 40.6% lower than the conventional A/O process.
作者
赵帅
倪慧成
李俊波
陈园园
闵杨洪
吴智仁
梁止水
ZHAO Shuai;NI Hui-cheng;LI Jun-bo;CHEN Yuan-yuan;MIN Yang-hong;WU Zhi-ren;LIANG Zhi-shui(School of the Environmental and Safety Engineering,Jiangsu University,Zhenjiang 212013,China;ATK Holdings Group Co.,Ltd,Yixing 214214,China;Institute of Environmental Health and Ecological Security,Jiangsu University,Zhenjiang 212013,China;School of Civil Engineering,Southeast University,Nanjing 210096,China)
出处
《环境工程》
CAS
CSCD
北大核心
2019年第9期18-23,共6页
Environmental Engineering
基金
国家重点研发计划政府间国际科技创新合作重点专项(2016YFE0126400)
关键词
BF填料
强化A/O工艺
脱氮
抗冲击负荷
污泥减量
BF packing materials
enhanced A/O process
nitrogen removal
impact load resistance
sludge reduction