摘要
An in situ high-energy X-ray diffraction(HE-XRD) technique was mainly used to investigate the micromechanical behavior of medium-Mn Fe-0.12 C-10.16 Mn-1.87 Al(in wt%) transformation-induced plasticit(TRIP) steel subjected to intercritical annealing at 625℃, 650℃, 675℃ and 700℃ for 1 h. As the intercritical annealing temperature increased, the volume fraction of retained austenite(RA) and ultimate tensilstress(UTS) increased, while the Lüders strain and yield stress(YS) decreased. The incremental workhardening exponent of experimental steel increased with increasing intercritical annealing temperatureThe overall trend of the transformation kinetics of the RA with respect to the true strain followed thsigmoidal shape predicted by the Olson and Cohen(OC) model. Load partitioning occurred among the ferrite, austenite and martensite immediately after entering the yielding stage. Because the stability of thRA decreased with increasing intercritical annealing temperature, the load undertaken by the martensitincreased. The moderate transformation kinetics of the RA and effective load partitioning among constituent phases were found to contribute to a favorable combination of strength and ductility for thimedium-Mn TRIP steel.
An in situ high-energy X-ray diffraction(HE-XRD) technique was mainly used to investigate the micromechanical behavior of medium-Mn Fe-0.12 C-10.16 Mn-1.87 Al(in wt%) transformation-induced plasticit(TRIP) steel subjected to intercritical annealing at 625℃, 650℃, 675℃ and 700℃ for 1 h. As the intercritical annealing temperature increased, the volume fraction of retained austenite(RA) and ultimate tensilstress(UTS) increased, while the Lüders strain and yield stress(YS) decreased. The incremental workhardening exponent of experimental steel increased with increasing intercritical annealing temperatureThe overall trend of the transformation kinetics of the RA with respect to the true strain followed thsigmoidal shape predicted by the Olson and Cohen(OC) model. Load partitioning occurred among the ferrite, austenite and martensite immediately after entering the yielding stage. Because the stability of thRA decreased with increasing intercritical annealing temperature, the load undertaken by the martensitincreased. The moderate transformation kinetics of the RA and effective load partitioning among constituent phases were found to contribute to a favorable combination of strength and ductility for thimedium-Mn TRIP steel.
基金
supported by the National Key Research and Development Program of China (No. 2017YFA0403804)
the National Natural Science Foundation of China (NSFC) (Nos. 51471032 and 51527801)
the Fundamental Research Funds for the Central Universities (Nos. 06111020 and 06111040)
the State Key Laboratory for Advanced Metals and Materials (Nos. 2016Z-01, 2016Z-12, and 2016Z-19)
financial support from the Chinese Scholarship Council (CSC)
supported by the US Department of Energy, Office of Science, Office of Basic Energy Sciences (No. DE-AC02-06CH11357)
