摘要
将混合极间检测所得脉冲类型比例用于控制机床进给系统的频率,并基于此提出了一种软件切断有害脉冲的方法,结合上、下位机之间工业以太网与CAN现场总线通信的设计及隔离驱动电路的设计,完成了脉冲电源的整体制作。实验表明,该脉冲电源的加工过程具有较高的稳定性,且加工效率有较大提升。
The ratio of the type of pulses detected by the hybrid pole was used to control the frequency of the machine' s feed system ,based on this, a method of software cutting off harmful pulse was proposed. Combining the design of Ethernet and CAN communication between the upper and lower computer and the design of the isolated and drive circuit, completed the overall production of pulse power. Experiment shows that the pulse power processing has high stability, and processing efficiency has greatly improved.
作者
官乐乐
蒋毅
赵万生
平雪良
宿磊
Guan Lele;Jiang Yi;Zhao Wansheng;Ping Xueliang;Su Lei(Jiangsu Province Key Laboratory of Advanced Food Manufacturing Equipment and Technology,Jiangnan University,Wuxi 214122,Jiangsu,China;Shanghai Jiao Tong University,Shanghai 200240,China)
出处
《现代制造工程》
CSCD
北大核心
2019年第9期94-99,共6页
Modern Manufacturing Engineering
基金
国家自然科学基金项目(51675233)
关键词
极间检测
有害脉冲切断
脉冲电源
加工效率
gap investigation
harmful pulse cut off
pulse power
processing efficiency
