摘要
High-quality solidification microstructure during directional solidification relies on precise temperature gradient control, so accurate calculation of the temperature field is critical. In this study, a 3D transient global heat transfer model of directional solidification by the Bridgman method based on the finite difference method is developed. The radiation heat in this model is calculated by the discrete transfer method, and a modified method of external surface area for irregular geometric models is proposed to reduce the zigzag shape caused by finite difference grids. Considering the radiative heat transfer between any surface elements of all materials in the directional solidification furnace, a dynamic ray tracing algorithm is developed to simulate the entire process of directional solidification. Then, the simulated results are compared with the theoretical results and experimental results, respectively. Finally, based on the present model and method, the simulation program developed is applied to the directional solidification of actual castings. The simulated results are in good agreement with the experimental results, which indicate that the model and method developed in this study is effective and practical.
High-quality solidification microstructure during directional solidification relies on precise temperature gradient control, so accurate calculation of the temperature field is critical. In this study, a 3D transient global heat transfer model of directional solidification by the Bridgman method based on the finite difference method is developed. The radiation heat in this model is calculated by the discrete transfer method, and a modified method of external surface area for irregular geometric models is proposed to reduce the zigzag shape caused by finite difference grids. Considering the radiative heat transfer between any surface elements of all materials in the directional solidification furnace, a dynamic ray tracing algorithm is developed to simulate the entire process of directional solidification. Then, the simulated results are compared with the theoretical results and experimental results, respectively. Finally, based on the present model and method, the simulation program developed is applied to the directional solidification of actual castings. The simulated results are in good agreement with the experimental results, which indicate that the model and method developed in this study is effective and practical.
基金
financially supported by the National Nature Science Fund Projects of China(Nos.51475181 and 51605174)
