摘要
Piezoresistive pressure sensors with a twin-island structure were suc- cessfully fabricated using high quality Unibond-SOI (On Insulator) materials. Since the piezoresistors were structured by the single crystalline silicon overlayer of the SOI wafer and were totally isolated by the buried SiO2. the sensors are radiation-hard. The sensitivity and the linearity of the pressure sensors keep their original values after being irradiated by 60Co γ-rays up to 2.3×104Gy (H2O). However, the offset voltage of the sensor has a slight drift, increasing with the radiation dose. The absolute value of the offset voltage deviation depends on the pressure sensor itself. For comparison, corresponding polysilicon pressure sensors were fabricated using the similar process and irradiated at the same condition.
Piezoresistive pressure sensors with a twin-island structure were suc- cessfully fabricated using high quality Unibond-SOI (On Insulator) materials. Since the piezoresistors were structured by the single crystalline silicon overlayer of the SOI wafer and were totally isolated by the buried SiO2. the sensors are radiation-hard. The sensitivity and the linearity of the pressure sensors keep their original values after being irradiated by 60Co γ-rays up to 2.3×104Gy (H2O). However, the offset voltage of the sensor has a slight drift, increasing with the radiation dose. The absolute value of the offset voltage deviation depends on the pressure sensor itself. For comparison, corresponding polysilicon pressure sensors were fabricated using the similar process and irradiated at the same condition.
基金
Supported by Science and Technology Development Foundation of Shanghai under Grant (No.98JC14004)
partly by National Natural
